lkml.org 
[lkml]   [2020]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 2/3] arm64: dts: qcom: trogdor: Add brightness-levels
Hi,

On Wed, Oct 21, 2020 at 10:05 PM Alexandru Stan <amstan@chromium.org> wrote:
>
> We want userspace to represent the human perceived brightness.
> Since the led drivers and the leds themselves don't have a
> linear response to the value we give them in terms of perceived
> brightness, we'll bake the curve into the dts.
>
> The panel also doesn't have a good response under 5%, so we'll avoid
> sending it anything lower than that.
>
> Note: Ideally this patch should be coupled with the driver change from
> "backlight: pwm_bl: Fix interpolation", but it can work without it,
> without looking too ugly.
>
> Signed-off-by: Alexandru Stan <amstan@chromium.org>
> ---
>
> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

\
 
 \ /
  Last update: 2020-10-23 01:08    [W:0.126 / U:24.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site