lkml.org 
[lkml]   [2020]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH V2 3/3] pwm: imx1: Use dev_err_probe() to simplify error handling
Date
dev_err_probe() can reduce code size, uniform error handling and record the
defer probe reason etc., use it to simplify the code.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
changes since V1:
- remove redundant return value print.
---
drivers/pwm/pwm-imx1.c | 21 ++++++---------------
1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/drivers/pwm/pwm-imx1.c b/drivers/pwm/pwm-imx1.c
index f8b2c2e..4877734 100644
--- a/drivers/pwm/pwm-imx1.c
+++ b/drivers/pwm/pwm-imx1.c
@@ -145,23 +145,14 @@ static int pwm_imx1_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, imx);

imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
- if (IS_ERR(imx->clk_ipg)) {
- dev_err(&pdev->dev, "getting ipg clock failed with %ld\n",
- PTR_ERR(imx->clk_ipg));
- return PTR_ERR(imx->clk_ipg);
- }
+ if (IS_ERR(imx->clk_ipg))
+ return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_ipg),
+ "getting ipg clock failed\n");

imx->clk_per = devm_clk_get(&pdev->dev, "per");
- if (IS_ERR(imx->clk_per)) {
- int ret = PTR_ERR(imx->clk_per);
-
- if (ret != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "failed to get peripheral clock: %d\n",
- ret);
-
- return ret;
- }
+ if (IS_ERR(imx->clk_per))
+ return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_per),
+ "failed to get peripheral clock\n");

imx->chip.ops = &pwm_imx1_ops;
imx->chip.dev = &pdev->dev;
--
2.7.4
\
 
 \ /
  Last update: 2020-10-20 07:47    [W:0.089 / U:0.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site