lkml.org 
[lkml]   [2020]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/4] arm: dts: add 8devices Jalapeno
On Wed, Sep 9, 2020 at 9:56 PM Robert Marko <robert.marko@sartura.hr> wrote:
>
> 8devices Jalapeno is a dual-band SoM, based on Qualcomm
> IPQ4018 + QCA8072 platform.
>
> Specification:
> QCA IPQ4018, Quad core ARM v7 Cortex A7 717MHz
> 256 MB of DDR3 RAM
> 8 MB of SPI NOR flash
> 128 MB of Winbond SPI NAND flash
> WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2
> WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2
> ETH: Qualcomm Atheros QCA8072 Gigabit Switch (1 x LAN, 1 x WAN)
>
> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
> Cc: Luka Perkov <luka.perkov@sartura.hr>
> ---
> Changes since v1:
> * Drop include that does not exist
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts | 214 ++++++++++++++++++++
> 2 files changed, 215 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4572db3fa5ae..9b474208057d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -890,6 +890,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
> qcom-apq8074-dragonboard.dtb \
> qcom-apq8084-ifc6540.dtb \
> qcom-apq8084-mtp.dtb \
> + qcom-ipq4018-jalapeno.dtb \
> qcom-ipq4019-ap.dk01.1-c1.dtb \
> qcom-ipq4019-ap.dk04.1-c1.dtb \
> qcom-ipq4019-ap.dk04.1-c3.dtb \
> diff --git a/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
> new file mode 100644
> index 000000000000..394412619894
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
> @@ -0,0 +1,214 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
> +
> +#include "qcom-ipq4019.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + model = "8devices Jalapeno";
> + compatible = "8dev,jalapeno";
> +};
> +
> +&tlmm {
> + mdio_pins: mdio_pinmux {
> + pinmux_1 {
> + pins = "gpio53";
> + function = "mdio";
> + };
> +
> + pinmux_2 {
> + pins = "gpio52";
> + function = "mdc";
> + };
> +
> + pinconf {
> + pins = "gpio52", "gpio53";
> + bias-pull-up;
> + };
> + };
> +
> + serial_pins: serial_pinmux {
> + mux {
> + pins = "gpio60", "gpio61";
> + function = "blsp_uart0";
> + bias-disable;
> + };
> + };
> +
> + spi_0_pins: spi_0_pinmux {
> + pin {
> + function = "blsp_spi0";
> + pins = "gpio55", "gpio56", "gpio57";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + pin_cs {
> + function = "gpio";
> + pins = "gpio54", "gpio59";
> + drive-strength = <2>;
> + bias-disable;
> + output-high;
> + };
> + };
> +};
> +
> +&watchdog {
> + status = "okay";
> +};
> +
> +&prng {
> + status = "okay";
> +};
> +
> +&blsp_dma {
> + status = "okay";
> +};
> +
> +&blsp1_spi1 {
> + status = "okay";
> +
> + pinctrl-0 = <&spi_0_pins>;
> + pinctrl-names = "default";
> + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
> +
> + flash@0 {
> + status = "okay";
> +
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <24000000>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "SBL1";
> + reg = <0x00000000 0x00040000>;
> + read-only;
> + };
> +
> + partition@40000 {
> + label = "MIBIB";
> + reg = <0x00040000 0x00020000>;
> + read-only;
> + };
> +
> + partition@60000 {
> + label = "QSEE";
> + reg = <0x00060000 0x00060000>;
> + read-only;
> + };
> +
> + partition@c0000 {
> + label = "CDT";
> + reg = <0x000c0000 0x00010000>;
> + read-only;
> + };
> +
> + partition@d0000 {
> + label = "DDRPARAMS";
> + reg = <0x000d0000 0x00010000>;
> + read-only;
> + };
> +
> + partition@e0000 {
> + label = "u-boot-env";
> + reg = <0x000e0000 0x00010000>;
> + };
> +
> + partition@f0000 {
> + label = "u-boot";
> + reg = <0x000f0000 0x00080000>;
> + read-only;
> + };
> +
> + partition@170000 {
> + label = "ART";
> + reg = <0x00170000 0x00010000>;
> + read-only;
> + };
> + };
> + };
> +
> + spi-nand@1 {
> + status = "okay";
> +
> + compatible = "spi-nand";
> + reg = <1>;
> + spi-max-frequency = <24000000>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "ubi1";
> + reg = <0x00000000 0x04000000>;
> + };
> +
> + partition@4000000 {
> + label = "ubi2";
> + reg = <0x04000000 0x04000000>;
> + };
> + };
> + };
> +};
> +
> +&blsp1_uart1 {
> + status = "okay";
> +
> + pinctrl-0 = <&serial_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&cryptobam {
> + status = "okay";
> +};
> +
> +&crypto {
> + status = "okay";
> +};
> +
> +&mdio {
> + status = "okay";
> +
> + pinctrl-0 = <&mdio_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&wifi0 {
> + status = "okay";
> +
> + qcom,ath10k-calibration-variant = "8devices-Jalapeno";
> +};
> +
> +&wifi1 {
> + status = "okay";
> +
> + qcom,ath10k-calibration-variant = "8devices-Jalapeno";
> +};
> +
> +&usb3_ss_phy {
> + status = "okay";
> +};
> +
> +&usb3_hs_phy {
> + status = "okay";
> +};
> +
> +&usb3 {
> + status = "okay";
> +};
> +
> +&usb2_hs_phy {
> + status = "okay";
> +};
> +
> +&usb2 {
> + status = "okay";
> +};
> --
> 2.26.2
>

Hi,
Is there an issue with the patch preventing the review?

Regards,
Robert

\
 
 \ /
  Last update: 2020-10-02 19:41    [W:0.125 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site