Messages in this thread | | | Date | Fri, 2 Oct 2020 16:26:16 +0200 | From | Pali Rohár <> | Subject | Re: [PATCH 0/2] PCI: aardvark: Fix comphy with old ATF |
| |
On Friday 02 October 2020 14:37:13 Lorenzo Pieralisi wrote: > On Wed, Sep 02, 2020 at 04:43:42PM +0200, Pali Rohár wrote: > > This patch series fixes regression introduced in commit 366697018c9a > > ("PCI: aardvark: Add PHY support") which caused aardvark driver > > initialization failure on EspressoBin board with factory version of > > Arm Trusted Firmware provided by Marvell. > > > > Second patch depends on the first patch, so please add appropriate > > Fixes/Cc:stable@ tags to have both patches correctly backported to > > stable kernels. > > > > I have tested both patches with Marvell ATF firmware ebin-17.10-uart.zip > > and with upstream ATF+uboot and aardvark was initialized successfully. > > Without this patch series on ebin-17.10-uart.zip aardvark initialization > > failed. > > > > Pali Rohár (2): > > phy: marvell: comphy: Convert internal SMCC firmware return codes to > > errno > > PCI: aardvark: Fix initialization with old Marvell's Arm Trusted > > Firmware > > > > drivers/pci/controller/pci-aardvark.c | 4 +++- > > drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 14 +++++++++++--- > > drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 14 +++++++++++--- > > 3 files changed, 25 insertions(+), 7 deletions(-) > > Applied to pci/aardvark (both patches), thanks.
Ok! For second patch would be needed to put CC:stable line with specifying prerequisite of first patch as written in document:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
If I understood it correctly, second patch needs following line:
Cc: <stable@vger.kernel.org> # <commit_id_of_first_path>: comphy: errno return codes
where <commit_id_of_first_path> is commit id of PATCH 1/2.
(correct me if I'm wrong)
Now when first commit has commit id, could you update second commit to include this information about prerequisite?
| |