Messages in this thread Patch in this message | | | Subject | Re: [Linux-kernel-mentees][PATCH v2] bluetooth: hci_h5: close serdev device and free hu in h5_close | From | Hans de Goede <> | Date | Fri, 2 Oct 2020 12:22:43 +0200 |
| |
Hi,
On 10/1/20 9:43 PM, Anant Thazhemadam wrote: > When h5_close() gets called, the memory allocated for the hu gets > freed only if hu->serdev doesn't exist. This leads to a memory leak. > So when h5_close() is requested, close the serdev device instance and > free the memory allocated to the hu entirely instead. > > Fixes: ce945552fde4 ("Bluetooth: hci_h5: Add support for serdev enumerated devices") > Reported-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com > Tested-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com > Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
So 2 comments to this:
1. You claim this change fixes a memory-leak, but in the serdev case the memory is allocated in h5_serdev_probe() like this:
h5 = devm_kzalloc(dev, sizeof(*h5), GFP_KERNEL);
So its lifetime is tied to the lifetime of the driver being bound to the serdev and it is automatically freed when the driver gets unbound. If you had looked at where the h5 struct gets allocated in h5_close()-s counterpart, h5_open() then you could have seen this there:
if (hu->serdev) { h5 = serdev_device_get_drvdata(hu->serdev); } else { h5 = kzalloc(sizeof(*h5), GFP_KERNEL); if (!h5) return -ENOMEM; }
So it is very clear here, that the kzalloc only happens in the if (!hu->serdev) which clearly makes the kfree() have the same condition the right thing todo. In the hu->serdev the data which was allocated by h5_serdev_probe() is used instead and no alloc happens inside h5_open()
In general when looking at resource teardown you should also look at where they are allocated in the mirror function and the teardown should mirror the alloc code.
So the main change of your commit is wrong:
NACK.
2. You are making multiple changes in a single commit here, I count at least 3. When ever you are making multiple changes like this, you should really split the commit up in 1 commit per change and explain in each commit message why that change is being made (why it is necessary). Writing commit messages like this also leads to you double-checking your own work by carefully considering why you are making the changes.
So about the 3 different changes:
2a) Make the kfree(h5) call unconditionally, which as mentioned above is wrong.
2b) Introduce a call to kfree_skb(h5->rx_skb); which is not mentioned in the commit message at all. This looks like it would actually be a sensible change, at least in the "if (!hu->serdev)" case. When using the serdev interface then just freeing it will leave a dangling pointer, so it would be better (for both the hu->serdev and the !hu->serdev cases) to call h5_reset_rx() on close instead which does:
if (h5->rx_skb) { kfree_skb(h5->rx_skb); h5->rx_skb = NULL; }
2c) Introduce a call to serdev_device_close(), without really explaining why in the commit message. Again if you would have looked at the mirror h5_close() function then you see no serdev_device_open() there. Actually serdev_device_open() is not called anywhere in the hci_h5.c code.
Digging a little deeper (using grep) shows that hci_uart_register_device() calls serdev_device_open() and hci_uart_register_device() gets called from: h5_serdev_probe(), likewise hci_uart_unregister_device() calls serdev_device_close() for us and that gets called from h5_serdev_remove(), so there is no need to call serdev_device_close() from h5_close() and doing so will actually break things, because then the serdev will be left closed on a subsequent h5_open() call.
Regards,
Hans
> --- > Changes in v2: > * Fixed the Fixes tag > > drivers/bluetooth/hci_h5.c | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c > index e41854e0d79a..3d1585add572 100644 > --- a/drivers/bluetooth/hci_h5.c > +++ b/drivers/bluetooth/hci_h5.c > @@ -248,8 +248,12 @@ static int h5_close(struct hci_uart *hu) > if (h5->vnd && h5->vnd->close) > h5->vnd->close(h5); > > - if (!hu->serdev) > - kfree(h5); > + if (hu->serdev) > + serdev_device_close(hu->serdev); > + > + kfree_skb(h5->rx_skb); > + kfree(h5); > + h5 = NULL; > > return 0; > } >
| |