lkml.org 
[lkml]   [2020]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v15 10/15] mtd: spi-nor: core: enable octal DTR mode when possible
Date
On 10/1/20 11:20 PM, Pratyush Yadav wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Allow flashes to specify a hook to enable octal DTR mode. Use this hook
> whenever possible to get optimal transfer speeds.
>
> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>

Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>

> ---
> drivers/mtd/spi-nor/core.c | 38 ++++++++++++++++++++++++++++++++++++++
> drivers/mtd/spi-nor/core.h | 2 ++
> 2 files changed, 40 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index e91ddb409699..cf6ada7c8a7b 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -3068,6 +3068,38 @@ static int spi_nor_init_params(struct spi_nor *nor)
> return 0;
> }
>
> +/** spi_nor_octal_dtr_enable() - enable Octal DTR I/O if needed
> + * @nor: pointer to a 'struct spi_nor'
> + * @enable: whether to enable or disable Octal DTR
> + *
> + * Return: 0 on success, -errno otherwise.
> + */
> +static int spi_nor_octal_dtr_enable(struct spi_nor *nor, bool enable)
> +{
> + int ret;
> +
> + if (!nor->params->octal_dtr_enable)
> + return 0;
> +
> + if (!(nor->read_proto == SNOR_PROTO_8_8_8_DTR &&
> + nor->write_proto == SNOR_PROTO_8_8_8_DTR))
> + return 0;
> +
> + if (!(nor->flags & SNOR_F_IO_MODE_EN_VOLATILE))
> + return 0;
> +
> + ret = nor->params->octal_dtr_enable(nor, enable);
> + if (ret)
> + return ret;
> +
> + if (enable)
> + nor->reg_proto = SNOR_PROTO_8_8_8_DTR;
> + else
> + nor->reg_proto = SNOR_PROTO_1_1_1;
> +
> + return 0;
> +}
> +
> /**
> * spi_nor_quad_enable() - enable Quad I/O if needed.
> * @nor: pointer to a 'struct spi_nor'
> @@ -3107,6 +3139,12 @@ static int spi_nor_init(struct spi_nor *nor)
> {
> int err;
>
> + err = spi_nor_octal_dtr_enable(nor, true);
> + if (err) {
> + dev_dbg(nor->dev, "octal mode not supported\n");
> + return err;
> + }
> +
> err = spi_nor_quad_enable(nor);
> if (err) {
> dev_dbg(nor->dev, "quad mode not supported\n");
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index eaece1123c0b..105a4ddeb309 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -204,6 +204,7 @@ struct spi_nor_locking_ops {
> * higher index in the array, the higher priority.
> * @erase_map: the erase map parsed from the SFDP Sector Map Parameter
> * Table.
> + * @octal_dtr_enable: enables SPI NOR octal DTR mode.
> * @quad_enable: enables SPI NOR quad mode.
> * @set_4byte_addr_mode: puts the SPI NOR in 4 byte addressing mode.
> * @convert_addr: converts an absolute address into something the flash
> @@ -227,6 +228,7 @@ struct spi_nor_flash_parameter {
>
> struct spi_nor_erase_map erase_map;
>
> + int (*octal_dtr_enable)(struct spi_nor *nor, bool enable);
> int (*quad_enable)(struct spi_nor *nor);
> int (*set_4byte_addr_mode)(struct spi_nor *nor, bool enable);
> u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
> --
> 2.28.0
>

\
 
 \ /
  Last update: 2020-10-02 11:48    [W:0.084 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site