lkml.org 
[lkml]   [2020]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ALSA: usb-audio: fix spelling mistake "Frequence" -> "Frequency"
From
Date
Dne 26. 11. 18 v 9:27 Takashi Iwai napsal(a):
> On Mon, 26 Nov 2018 00:12:08 +0100,
> Colin King wrote:
>>
>> From: Colin Ian King <colin.king@canonical.com>
>>
>> There are spelling mistakes in equalizer name fields, fix them.
>>
>> Signed-off-by: Colin Ian King <colin.king@canonical.com>
>
> In general, it's not good to rename the control names even if they are
> fixes. But these are rather device-specific ones, and they are EQ's,
> which aren't too fatal to change, so I took it as-is now.

It seems that this patch has not found a way to kernel. It is present
in #master at git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git,
but it is not present in linux-next.

Thanks,
Jaroslav

>
>
> thanks,
>
> Takashi
>
>
>> ---
>> sound/usb/mixer_us16x08.c | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/sound/usb/mixer_us16x08.c b/sound/usb/mixer_us16x08.c
>> index 26ed23b18b77..4f594f9552a8 100644
>> --- a/sound/usb/mixer_us16x08.c
>> +++ b/sound/usb/mixer_us16x08.c
>> @@ -1119,7 +1119,7 @@ static const struct snd_us16x08_control_params eq_controls[] = {
>> .control_id = SND_US16X08_ID_EQLOWFREQ,
>> .type = USB_MIXER_U8,
>> .num_channels = 16,
>> - .name = "EQ Low Frequence",
>> + .name = "EQ Low Frequency",
>> },
>> { /* EQ mid low gain */
>> .kcontrol_new = &snd_us16x08_eq_gain_ctl,
>> @@ -1133,7 +1133,7 @@ static const struct snd_us16x08_control_params eq_controls[] = {
>> .control_id = SND_US16X08_ID_EQLOWMIDFREQ,
>> .type = USB_MIXER_U8,
>> .num_channels = 16,
>> - .name = "EQ MidLow Frequence",
>> + .name = "EQ MidLow Frequency",
>> },
>> { /* EQ mid low Q */
>> .kcontrol_new = &snd_us16x08_eq_mid_width_ctl,
>> @@ -1154,7 +1154,7 @@ static const struct snd_us16x08_control_params eq_controls[] = {
>> .control_id = SND_US16X08_ID_EQHIGHMIDFREQ,
>> .type = USB_MIXER_U8,
>> .num_channels = 16,
>> - .name = "EQ MidHigh Frequence",
>> + .name = "EQ MidHigh Frequency",
>> },
>> { /* EQ mid high Q */
>> .kcontrol_new = &snd_us16x08_eq_mid_width_ctl,
>> @@ -1175,7 +1175,7 @@ static const struct snd_us16x08_control_params eq_controls[] = {
>> .control_id = SND_US16X08_ID_EQHIGHFREQ,
>> .type = USB_MIXER_U8,
>> .num_channels = 16,
>> - .name = "EQ High Frequence",
>> + .name = "EQ High Frequency",
>> },
>> };
>>
>> --
>> 2.19.1
>>
>>


--
Jaroslav Kysela <perex@perex.cz>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.

\
 
 \ /
  Last update: 2020-10-02 11:26    [W:0.041 / U:1.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site