lkml.org 
[lkml]   [2020]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay
Hi,

On Sun, 18 Oct 2020 at 19:24, Clément Péron <peron.clem@gmail.com> wrote:
>
> Before the commit:
> net: phy: realtek: fix rtl8211e rx/tx delay config
bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config")

With the hash for reference it's better :)
Clement

>
> The software overwrite for RX/TX delays of the RTL8211e were not
> working properly and the Beelink GS1 had both RX/TX delay of RGMII
> interface set using pull-up on the TXDLY and RXDLY pins.
>
> Now that these delays are working properly they overwrite the HW
> config and set this to 'rgmii' meaning no delay on both RX/TX.
> This makes the ethernet of this board not working anymore.
>
> Set the phy-mode to 'rgmii-id' meaning RGMII with RX/TX delays
> in the device-tree to keep the correct configuration.
>
> Fixes: 089bee8dd119 ("arm64: dts: allwinner: h6: Introduce Beelink GS1 board")
> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> index a364cb4e5b3f..6ab53860e447 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> @@ -99,7 +99,7 @@ &ehci0 {
> &emac {
> pinctrl-names = "default";
> pinctrl-0 = <&ext_rgmii_pins>;
> - phy-mode = "rgmii";
> + phy-mode = "rgmii-id";
> phy-handle = <&ext_rgmii_phy>;
> phy-supply = <&reg_aldo2>;
> status = "okay";
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2020-10-18 19:58    [W:0.049 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site