Messages in this thread | | | Subject | Re: [PATCH v8 0/4] SFH: Add Support for AMD Sensor Fusion Hub | From | "Singh, Sandeep" <> | Date | Sat, 17 Oct 2020 14:50:07 +0530 |
| |
Hi Folks,
On 10/10/2020 1:31 AM, Sandeep Singh wrote: > From: Sandeep Singh <sandeep.singh@amd.com> > > AMD SFH(Sensor Fusion Hub) is HID based driver.SFH FW is part of MP2 > processor (MP2 which is an ARM core connected to x86 for processing > sensor data) and it runs on MP2 where in the driver resides on X86. > The driver functionalities are divided into three parts:- > > 1: amd-mp2-pcie:- This part of the module will communicate with MP2 > firmware. MP2 which is exposed as a PCI device to the > X86, uses mailboxes to talk to MP2 firmware to > send/receive commands. > 2: Client Layer:- This part of the driver will use DRAM data and convert > the data into HID format based on HID reports. > 3: Transport layer :- This part of the driver the will communicate with HID > core.Communication between devices and HID core is > mostly done via HID reports > > In terms of architecture, it resembles like ISH (Intel Integrated Sensor > Hub). However the major difference is all the hid reports are generated > as part of the kernel driver. > > AMD SFH is integrated as a part of SoC, starting from 17h family of > processors. The solution is working well on several OEM products. > AMD SFH uses HID over PCIe bus. > > Changes since v1: > -> Fix auto build test warnings > -> Fix smatch warnings "possible memory leak" -Reported by Dan > carpenter > > Links of the review comments for v1: > [1] https://patchwork.kernel.org/patch/11325163/ > [2] https://patchwork.kernel.org/patch/11325167/ > [3] https://patchwork.kernel.org/patch/11325171/ > [4] https://patchwork.kernel.org/patch/11325187/ > > Changes since v2: > -> Debugfs divided into another patch > -> Fix some cosmetic changes > -> Fix for review comments > Reported and Suggested by:- Srinivas Pandruvada > > Links of the review comments for v2: > [1] https://patchwork.kernel.org/patch/11355491/ > [2] https://patchwork.kernel.org/patch/11355495/ > [3] https://patchwork.kernel.org/patch/11355499/ > [4] https://patchwork.kernel.org/patch/11355503/ > > Changes since v3: > -> Removed debugfs suggested by - Benjamin Tissoires > > Links of the review comments for v3: > [1] https://lkml.org/lkml/2020/2/11/1256 > [2] https://lkml.org/lkml/2020/2/11/1257 > [3] https://lkml.org/lkml/2020/2/11/1258 > [4] https://lkml.org/lkml/2020/2/11/1259 > [5] https://lkml.org/lkml/2020/2/11/1260 > > Changes since v4: > -> use PCI managed calls. > -> use kernel APIs > > Links of the review comments for v4: > [1] https://lkml.org/lkml/2020/2/26/1360 > [2] https://lkml.org/lkml/2020/2/26/1361 > [3] https://lkml.org/lkml/2020/2/26/1362 > [4] https://lkml.org/lkml/2020/2/26/1363 > [5] https://lkml.org/lkml/2020/2/27/1 > Changes since v5 > -> Fix for review comments by: Andy Shevchenko > -> Fix for indentations erros, NULL pointer,Redundant assignment > -> Drop LOCs in many location > -> Create as a single driver module instead of two modules. > > Links of the review comments for v5: > [1] https://lkml.org/lkml/2020/5/29/589 > [2] https://lkml.org/lkml/2020/5/29/590 > [3] https://lkml.org/lkml/2020/5/29/606 > [4] https://lkml.org/lkml/2020/5/29/632 > [5] https://lkml.org/lkml/2020/5/29/633 > > Changes since v6 > -> fix Kbuild warning "warning: ignoring return value of > 'pcim_enable_device', > -> Removed select HID and add depends on HID > > Links of the review comments for v6: > [1] https://lkml.org/lkml/2020/8/9/58 > [2] https://lkml.org/lkml/2020/8/9/59 > [3] https://lkml.org/lkml/2020/8/9/125 > [4] https://lkml.org/lkml/2020/8/9/61 > [5] https://lkml.org/lkml/2020/8/9/91 > > Changes since v7 > -> Add Co-deveploed-by > -> Build the Documentation > -> Fix cosmatic changes > -> Add init function inside probe function > -> Use devm_add_action_or_reset() to avoids the remove() > callback. > > Links of the review comments for v7: > [1] https://lkml.org/lkml/2020/8/10/1221 > [2] https://lkml.org/lkml/2020/8/10/1222 > [3] https://lkml.org/lkml/2020/8/10/1223 > [4] https://lkml.org/lkml/2020/8/10/1224 > [5] https://lkml.org/lkml/2020/8/10/1225 > > Sandeep Singh (4): > SFH: Add maintainers and documentation for AMD SFH based on HID > framework > SFH: PCIe driver to add support of AMD sensor fusion hub > SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH) > SFH: Create HID report to Enable support of AMD sensor fusion Hub > (SFH) > > Documentation/hid/amd-sfh-hid.rst | 145 ++++ > Documentation/hid/index.rst | 1 + > MAINTAINERS | 8 + > drivers/hid/Kconfig | 2 + > drivers/hid/Makefile | 2 + > drivers/hid/amd-sfh-hid/Kconfig | 18 + > drivers/hid/amd-sfh-hid/Makefile | 13 + > drivers/hid/amd-sfh-hid/amd_sfh_client.c | 246 +++++++ > drivers/hid/amd-sfh-hid/amd_sfh_hid.c | 174 +++++ > drivers/hid/amd-sfh-hid/amd_sfh_hid.h | 67 ++ > drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 152 +++++ > drivers/hid/amd-sfh-hid/amd_sfh_pcie.h | 79 +++ > .../hid_descriptor/amd_sfh_hid_desc.c | 224 ++++++ > .../hid_descriptor/amd_sfh_hid_desc.h | 121 ++++ > .../hid_descriptor/amd_sfh_hid_report_desc.h | 645 ++++++++++++++++++ > 15 files changed, 1897 insertions(+) > create mode 100644 Documentation/hid/amd-sfh-hid.rst > create mode 100644 drivers/hid/amd-sfh-hid/Kconfig > create mode 100644 drivers/hid/amd-sfh-hid/Makefile > create mode 100644 drivers/hid/amd-sfh-hid/amd_sfh_client.c > create mode 100644 drivers/hid/amd-sfh-hid/amd_sfh_hid.c > create mode 100644 drivers/hid/amd-sfh-hid/amd_sfh_hid.h > create mode 100644 drivers/hid/amd-sfh-hid/amd_sfh_pcie.c > create mode 100644 drivers/hid/amd-sfh-hid/amd_sfh_pcie.h > create mode 100644 drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.c > create mode 100644 drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.h > create mode 100644 drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_report_desc.h Any feedback on this patch series.?
| |