lkml.org 
[lkml]   [2020]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/18] dt-bindings: usb: dwc3: Add interrupt-names property support
Date
The controller driver supports two types of DWC USB3 devices: with a
common interrupt lane and with individual interrupts for each mode. Add
both of these cases support to the DWC USB3 DT schema.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 24808fc2c7e3..6857086920c2 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -23,8 +23,19 @@ properties:
const: "snps,dwc3"

interrupts:
+ description: |
+ It's either a single common DWC3 interrupt (dwc_usb3) or individual
+ interrupts for the host, gadget and DRD modes.
+ minItems: 1
+ maxItems: 3
+
+ interrupt-names:
minItems: 1
maxItems: 3
+ oneOf:
+ - const: "dwc_usb3"
+ - items:
+ enum: ["host", "peripheral", "otg"]

clocks:
description: |
--
2.27.0
\
 
 \ /
  Last update: 2020-10-11 01:10    [W:0.616 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site