lkml.org 
[lkml]   [2020]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 devicetree 0/2] Add Seville Ethernet switch to T1040RDB
Date
On Thu, Oct 01, 2020 at 01:10:05PM -0700, David Miller wrote:
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
> Date: Thu, 1 Oct 2020 16:20:11 +0300
>
> > Seville is a DSA switch that is embedded inside the T1040 SoC, and
> > supported by the mscc_seville DSA driver inside drivers/net/dsa/ocelot.
> >
> > This series adds this switch to the SoC's dtsi files and to the T1040RDB
> > board file.
>
> I am assuming the devicetree folks will pick this series up.
>
> Thanks.
>

I can also resend via net-next if that's easier (the last commit on
arch/powerpc/boot/dts/fsl/t104*, as per today's linux-next, has been in
2018, so there is no conflict).

I need to resend anyway, due to an epic failure where I got the port
numbering wrong...
\
 
 \ /
  Last update: 2020-10-02 02:51    [W:0.113 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site