lkml.org 
[lkml]   [2020]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/12] docs: i2c: use the new API in 'instantiating-devices.rst'
Date
i2c_new_device is deprecated, use i2c_new_client_device.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
Documentation/i2c/instantiating-devices.rst | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/i2c/instantiating-devices.rst b/Documentation/i2c/instantiating-devices.rst
index 875ebe9e78e3..b7b90b1b82f9 100644
--- a/Documentation/i2c/instantiating-devices.rst
+++ b/Documentation/i2c/instantiating-devices.rst
@@ -98,7 +98,7 @@ tuner, a video decoder, an audio decoder, etc. usually connected to the
main chip by the means of an I2C bus. You won't know the number of the I2C
bus in advance, so the method 1 described above can't be used. Instead,
you can instantiate your I2C devices explicitly. This is done by filling
-a struct i2c_board_info and calling i2c_new_device().
+a struct i2c_board_info and calling i2c_new_client_device().

Example (from the sfe4001 network driver)::

@@ -110,7 +110,7 @@ Example (from the sfe4001 network driver)::
{
(...)
efx->board_info.hwmon_client =
- i2c_new_device(&efx->i2c_adap, &sfe4001_hwmon_info);
+ i2c_new_client_device(&efx->i2c_adap, &sfe4001_hwmon_info);

(...)
}
@@ -123,7 +123,7 @@ present or not (for example for an optional feature which is not present
on cheap variants of a board but you have no way to tell them apart), or
it may have different addresses from one board to the next (manufacturer
changing its design without notice). In this case, you can call
-i2c_new_scanned_device() instead of i2c_new_device().
+i2c_new_scanned_device() instead of i2c_new_client_device().

Example (from the nxp OHCI driver)::

@@ -152,7 +152,7 @@ simply gives up.

The driver which instantiated the I2C device is responsible for destroying
it on cleanup. This is done by calling i2c_unregister_device() on the
-pointer that was earlier returned by i2c_new_device() or
+pointer that was earlier returned by i2c_new_client_device() or
i2c_new_scanned_device().


--
2.20.1
\
 
 \ /
  Last update: 2020-01-07 18:49    [W:0.179 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site