lkml.org 
[lkml]   [2020]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/3] media: platform: meson-ao-cec-g12a: add wakeup support
From
Date
Hi Guillaume,

On 12/13/19 2:29 PM, Guillaume La Roque wrote:
> add register configuration to activate wakeup feature in bl301
>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
> ---
> drivers/media/platform/meson/ao-cec-g12a.c | 33 ++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/drivers/media/platform/meson/ao-cec-g12a.c b/drivers/media/platform/meson/ao-cec-g12a.c
> index 891533060d49..85850b974126 100644
> --- a/drivers/media/platform/meson/ao-cec-g12a.c
> +++ b/drivers/media/platform/meson/ao-cec-g12a.c
> @@ -25,6 +25,7 @@
> #include <media/cec.h>
> #include <media/cec-notifier.h>
> #include <linux/clk-provider.h>
> +#include <linux/mfd/syscon.h>
>
> /* CEC Registers */
>
> @@ -168,6 +169,18 @@
>
> #define CECB_WAKEUPCTRL 0x31
>
> +#define CECB_FUNC_CFG_REG 0xA0
> +#define CECB_FUNC_CFG_MASK GENMASK(6, 0)
> +#define CECB_FUNC_CFG_CEC_ON 0x01
> +#define CECB_FUNC_CFG_OTP_ON 0x02
> +#define CECB_FUNC_CFG_AUTO_STANDBY 0x04
> +#define CECB_FUNC_CFG_AUTO_POWER_ON 0x08
> +#define CECB_FUNC_CFG_ALL 0x2f
> +#define CECB_FUNC_CFG_NONE 0x0
> +
> +#define CECB_LOG_ADDR_REG 0xA4
> +#define CECB_LOG_ADDR_MASK GENMASK(22, 16)
> +
> struct meson_ao_cec_g12a_data {
> /* Setup the internal CECB_CTRL2 register */
> bool ctrl2_setup;
> @@ -177,6 +190,7 @@ struct meson_ao_cec_g12a_device {
> struct platform_device *pdev;
> struct regmap *regmap;
> struct regmap *regmap_cec;
> + struct regmap *regmap_ao_sysctrl;
> spinlock_t cec_reg_lock;
> struct cec_notifier *notify;
> struct cec_adapter *adap;
> @@ -518,6 +532,13 @@ meson_ao_cec_g12a_set_log_addr(struct cec_adapter *adap, u8 logical_addr)
> BIT(logical_addr - 8));
> }
>
> + if (ao_cec->regmap_ao_sysctrl)
> + ret |= regmap_update_bits(ao_cec->regmap_ao_sysctrl,
> + CECB_LOG_ADDR_REG,
> + CECB_LOG_ADDR_MASK,
> + FIELD_PREP(CECB_LOG_ADDR_MASK,
> + logical_addr));
> +
> /* Always set Broadcast/Unregistered 15 address */
> ret |= regmap_update_bits(ao_cec->regmap_cec, CECB_LADD_HIGH,
> BIT(CEC_LOG_ADDR_UNREGISTERED - 8),
> @@ -618,6 +639,13 @@ static int meson_ao_cec_g12a_adap_enable(struct cec_adapter *adap, bool enable)
> regmap_write(ao_cec->regmap_cec, CECB_CTRL2,
> FIELD_PREP(CECB_CTRL2_RISE_DEL_MAX, 2));
>
> + if (ao_cec->regmap_ao_sysctrl) {
> + regmap_update_bits(ao_cec->regmap_ao_sysctrl,
> + CECB_FUNC_CFG_REG,
> + CECB_FUNC_CFG_MASK,
> + CECB_FUNC_CFG_ALL);

What exactly is enabled here? Looking at CECB_FUNC_CFG_ALL it seems to
enable automatic standby (I presume when the STANDBY message is received?)
and power on (I presume when SET_STREAM_PATH is received?).

Do you really want to automatically handle STANDBY that way? What does this
do on the hardware level anyway? Isn't this something that should be
controlled in userspace?

Similar questions for power on: you may not always want to enable this feature
since it depends very much on the precise use-case.

And which messages it reacts to in order to do a power-on needs to be
documented since this differs depending on whether the CEC adapter is
used for a TV or for a playback device. This feature may be hardwired for
a playback device only, in which case it should probably be disabled if
the CEC adapter is configured as a TV.

In any case I would like to see some more details about how this works,
especially since this is the first implementation of such a feature.

I suspect that some userspace API might be needed to get the right level
of control of such a feature.

Regards,

Hans

> + }
> +
> meson_ao_cec_g12a_irq_setup(ao_cec, true);
>
> return 0;
> @@ -685,6 +713,11 @@ static int meson_ao_cec_g12a_probe(struct platform_device *pdev)
> goto out_probe_adapter;
> }
>
> + ao_cec->regmap_ao_sysctrl = syscon_regmap_lookup_by_phandle
> + (pdev->dev.of_node, "amlogic,ao-sysctrl");
> + if (IS_ERR(ao_cec->regmap_ao_sysctrl))
> + dev_warn(&pdev->dev, "ao-sysctrl syscon regmap lookup failed.\n");
> +
> irq = platform_get_irq(pdev, 0);
> ret = devm_request_threaded_irq(&pdev->dev, irq,
> meson_ao_cec_g12a_irq,
>

\
 
 \ /
  Last update: 2020-01-07 15:37    [W:0.096 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site