lkml.org 
[lkml]   [2020]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 063/115] ata: ahci_brcm: Add missing clock management during recovery
Date
From: Florian Fainelli <f.fainelli@gmail.com>

commit bf0e5013bc2dcac205417e1252205dca39dfc005 upstream.

The downstream implementation of ahci_brcm.c did contain clock
management recovery, but until recently, did that outside of the
libahci_platform helpers and this was unintentionally stripped out while
forward porting the patch upstream.

Add the missing clock management during recovery and sleep for 10
milliseconds per the design team recommendations to ensure the SATA PHY
controller and AFE have been fully quiesced.

Fixes: eb73390ae241 ("ata: ahci_brcm: Recover from failures to identify devices")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/ata/ahci_brcm.c | 7 +++++++
1 file changed, 7 insertions(+)

--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -284,6 +284,13 @@ static unsigned int brcm_ahci_read_id(st
/* Perform the SATA PHY reset sequence */
brcm_sata_phy_disable(priv, ap->port_no);

+ /* Reset the SATA clock */
+ ahci_platform_disable_clks(hpriv);
+ msleep(10);
+
+ ahci_platform_enable_clks(hpriv);
+ msleep(10);
+
/* Bring the PHY back on */
brcm_sata_phy_enable(priv, ap->port_no);


\
 
 \ /
  Last update: 2020-01-07 22:40    [W:0.336 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site