lkml.org 
[lkml]   [2020]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/8] dt-bindings: remoteproc: Add Qualcomm PIL info binding
On Sat 04 Jan 13:38 PST 2020, Rob Herring wrote:

> On Thu, Dec 26, 2019 at 09:32:08PM -0800, Bjorn Andersson wrote:
> > Add a devicetree binding for the Qualcomm periperal image loader
> > relocation info region found in the IMEM.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> >
> > Changes since v1:
> > - New patch
> >
> > .../bindings/remoteproc/qcom,pil-info.yaml | 35 +++++++++++++++++++
> > 1 file changed, 35 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> > new file mode 100644
> > index 000000000000..715945c683ed
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> > @@ -0,0 +1,35 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/remoteproc/qcom,pil-info.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: Qualcomm peripheral image loader relocation info binding
> > +
> > +description:
> > + This document defines the binding for describing the Qualcomm peripheral
> > + image loader relocation memory region, in IMEM, which is used for post mortem
> > + debugging of remoteprocs.
> > +
> > +maintainers:
> > + - Bjorn Andersson <bjorn.andersson@linaro.org>
> > +
> > +properties:
> > + compatible:
> > + const: qcom,pil-reloc-info
> > +
> > + offset:
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + description: Offset in the register map for the memory region
>
> Why not use 'reg' instead?
>

Because we have one prior example of subdevice of "imem", which is
compatible "syscon-reboot-mode" and that binding uses "offset".

That said, if you insist, reg (and ranges) would allow us to express the
size of the region...

Regards,
Bjorn

> > +
> > +examples:
> > + - |
> > + imem@146bf000 {
> > + compatible = "syscon", "simple-mfd";
> > + reg = <0 0x146bf000 0 0x1000>;
> > +
> > + pil-reloc {
> > + compatible ="qcom,pil-reloc-info";
> > + offset = <0x94c>;
> > + };
> > + };
> > --
> > 2.24.0
> >

\
 
 \ /
  Last update: 2020-01-04 23:18    [W:0.184 / U:0.928 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site