lkml.org 
[lkml]   [2020]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v3] Add A618 GPU nodes
    Date
    I used this branch qcom/arm64-for-5.6-to-be-rebased as suggested by Matthias.
    This patch needs the clock patches and the clock patches have not yet landed, so
    please apply the following series and patches in order

    a) All patches from https://patchwork.kernel.org/project/linux-clk/list/?series=203517&state=%2a&archive=both
    b) Patches 1 and 2 from https://patchwork.kernel.org/project/linux-clk/list/?series=203527&archive=both&state=%2a
    c) All patches from https://patchwork.kernel.org/project/linux-clk/list/?series=221739&archive=both&state=%2a
    d) https://lore.kernel.org/linux-arm-msm/20200124144154.v2.10.I1a4b93fb005791e29a9dcf288fc8bd459a555a59%40changeid/raw
    e) This patch "arm64: dts: qcom: sc7180: Add A618 gpu dt blob"

    v3: Addressed review comments from previous submits. Also removed the
    interconnect bindings from this patch and I will submit as a new patch with its
    dependencies listed. Also I will be sending a new patch for updating the
    bindings documentation.

    Sharat Masetty (1):
    arm64: dts: qcom: sc7180: Add A618 gpu dt blob

    arch/arm64/boot/dts/qcom/sc7180.dtsi | 102 +++++++++++++++++++++++++++++++++++
    1 file changed, 102 insertions(+)

    --
    1.9.1

    \
     
     \ /
      Last update: 2020-01-31 13:04    [W:3.422 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site