lkml.org 
[lkml]   [2020]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 4.19 146/639] ARM: dts: sun8i-a23-a33: Move NAND controller device node to sort by address
    Date
    From: Chen-Yu Tsai <wens@csie.org>

    [ Upstream commit d027521497592773cd23d016d36975574d3452db ]

    The NAND controller device node was inserted into the wrong position,
    probably due to a rebase or merge, as the file's structure does not
    provide enough context for git to accurately match the previous device
    node block.

    Fixes: d7b843df13ea ("ARM: dts: sun8i: add NAND controller node for A23/A33")
    Signed-off-by: Chen-Yu Tsai <wens@csie.org>
    Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    arch/arm/boot/dts/sun8i-a23-a33.dtsi | 28 +++++++++++++---------------
    1 file changed, 13 insertions(+), 15 deletions(-)

    diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
    index c16ffcc4db7da..a272a69519a26 100644
    --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
    +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
    @@ -155,6 +155,19 @@
    #dma-cells = <1>;
    };

    + nfc: nand@1c03000 {
    + compatible = "allwinner,sun4i-a10-nand";
    + reg = <0x01c03000 0x1000>;
    + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
    + clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
    + clock-names = "ahb", "mod";
    + resets = <&ccu RST_BUS_NAND>;
    + reset-names = "ahb";
    + status = "disabled";
    + #address-cells = <1>;
    + #size-cells = <0>;
    + };
    +
    mmc0: mmc@1c0f000 {
    compatible = "allwinner,sun7i-a20-mmc";
    reg = <0x01c0f000 0x1000>;
    @@ -212,21 +225,6 @@
    #size-cells = <0>;
    };

    - nfc: nand@1c03000 {
    - compatible = "allwinner,sun4i-a10-nand";
    - reg = <0x01c03000 0x1000>;
    - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
    - clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
    - clock-names = "ahb", "mod";
    - resets = <&ccu RST_BUS_NAND>;
    - reset-names = "ahb";
    - pinctrl-names = "default";
    - pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>;
    - status = "disabled";
    - #address-cells = <1>;
    - #size-cells = <0>;
    - };
    -
    usb_otg: usb@1c19000 {
    /* compatible gets set in SoC specific dtsi file */
    reg = <0x01c19000 0x0400>;
    --
    2.20.1


    \
     
     \ /
      Last update: 2020-01-24 12:07    [W:3.267 / U:0.608 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site