lkml.org 
[lkml]   [2020]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 004/639] i2c: i2c-stm32f7: fix 10-bits check in slave free id search loop
Date
From: Alain Volmat <alain.volmat@st.com>

commit 7787657d7ee55a9ecf4aea4907b46b87a44eda67 upstream.

Fix a typo in the free slave id search loop. Instead of I2C_CLIENT_PEC,
it should have been I2C_CLIENT_TEN. The slave id 1 can only handle 7-bit
addresses and thus is not eligible in case of 10-bit addresses.
As a matter of fact none of the slave id support I2C_CLIENT_PEC, overall
check is performed at the beginning of the stm32f7_i2c_reg_slave function.

Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support")
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/i2c/busses/i2c-stm32f7.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1253,7 +1253,7 @@ static int stm32f7_i2c_get_free_slave_id
* slave[1] supports 7-bit slave address only
*/
for (i = STM32F7_I2C_MAX_SLAVE - 1; i >= 0; i--) {
- if (i == 1 && (slave->flags & I2C_CLIENT_PEC))
+ if (i == 1 && (slave->flags & I2C_CLIENT_TEN))
continue;
if (!i2c_dev->slave[i]) {
*id = i;

\
 
 \ /
  Last update: 2020-01-24 10:38    [W:1.297 / U:0.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site