lkml.org 
[lkml]   [2020]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] Add prctl support for controlling mem reclaim V4
From
Date
On 12/05/2019 04:43 PM, Shakeel Butt wrote:
> On Mon, Nov 11, 2019 at 4:19 PM Mike Christie <mchristi@redhat.com> wrote:
>>
>> There are several storage drivers like dm-multipath, iscsi, tcmu-runner,
>> amd nbd that have userspace components that can run in the IO path. For
>> example, iscsi and nbd's userspace deamons may need to recreate a socket
>> and/or send IO on it, and dm-multipath's daemon multipathd may need to
>> send SG IO or read/write IO to figure out the state of paths and re-set
>> them up.
>>
>> In the kernel these drivers have access to GFP_NOIO/GFP_NOFS and the
>> memalloc_*_save/restore functions to control the allocation behavior,
>> but for userspace we would end up hitting an allocation that ended up
>> writing data back to the same device we are trying to allocate for.
>> The device is then in a state of deadlock, because to execute IO the
>> device needs to allocate memory, but to allocate memory the memory
>> layers want execute IO to the device.
>>
>> Here is an example with nbd using a local userspace daemon that performs
>> network IO to a remote server. We are using XFS on top of the nbd device,
>> but it can happen with any FS or other modules layered on top of the nbd
>> device that can write out data to free memory. Here a nbd daemon helper
>> thread, msgr-worker-1, is performing a write/sendmsg on a socket to execute
>> a request. This kicks off a reclaim operation which results in a WRITE to
>> the nbd device and the nbd thread calling back into the mm layer.
>>
>> [ 1626.609191] msgr-worker-1 D 0 1026 1 0x00004000
>> [ 1626.609193] Call Trace:
>> [ 1626.609195] ? __schedule+0x29b/0x630
>> [ 1626.609197] ? wait_for_completion+0xe0/0x170
>> [ 1626.609198] schedule+0x30/0xb0
>> [ 1626.609200] schedule_timeout+0x1f6/0x2f0
>> [ 1626.609202] ? blk_finish_plug+0x21/0x2e
>> [ 1626.609204] ? _xfs_buf_ioapply+0x2e6/0x410
>> [ 1626.609206] ? wait_for_completion+0xe0/0x170
>> [ 1626.609208] wait_for_completion+0x108/0x170
>> [ 1626.609210] ? wake_up_q+0x70/0x70
>> [ 1626.609212] ? __xfs_buf_submit+0x12e/0x250
>> [ 1626.609214] ? xfs_bwrite+0x25/0x60
>> [ 1626.609215] xfs_buf_iowait+0x22/0xf0
>> [ 1626.609218] __xfs_buf_submit+0x12e/0x250
>> [ 1626.609220] xfs_bwrite+0x25/0x60
>> [ 1626.609222] xfs_reclaim_inode+0x2e8/0x310
>> [ 1626.609224] xfs_reclaim_inodes_ag+0x1b6/0x300
>> [ 1626.609227] xfs_reclaim_inodes_nr+0x31/0x40
>> [ 1626.609228] super_cache_scan+0x152/0x1a0
>> [ 1626.609231] do_shrink_slab+0x12c/0x2d0
>> [ 1626.609233] shrink_slab+0x9c/0x2a0
>> [ 1626.609235] shrink_node+0xd7/0x470
>> [ 1626.609237] do_try_to_free_pages+0xbf/0x380
>> [ 1626.609240] try_to_free_pages+0xd9/0x1f0
>> [ 1626.609245] __alloc_pages_slowpath+0x3a4/0xd30
>> [ 1626.609251] ? ___slab_alloc+0x238/0x560
>> [ 1626.609254] __alloc_pages_nodemask+0x30c/0x350
>> [ 1626.609259] skb_page_frag_refill+0x97/0xd0
>> [ 1626.609274] sk_page_frag_refill+0x1d/0x80
>> [ 1626.609279] tcp_sendmsg_locked+0x2bb/0xdd0
>> [ 1626.609304] tcp_sendmsg+0x27/0x40
>> [ 1626.609307] sock_sendmsg+0x54/0x60
>> [ 1626.609308] ___sys_sendmsg+0x29f/0x320
>> [ 1626.609313] ? sock_poll+0x66/0xb0
>> [ 1626.609318] ? ep_item_poll.isra.15+0x40/0xc0
>> [ 1626.609320] ? ep_send_events_proc+0xe6/0x230
>> [ 1626.609322] ? hrtimer_try_to_cancel+0x54/0xf0
>> [ 1626.609324] ? ep_read_events_proc+0xc0/0xc0
>> [ 1626.609326] ? _raw_write_unlock_irq+0xa/0x20
>> [ 1626.609327] ? ep_scan_ready_list.constprop.19+0x218/0x230
>> [ 1626.609329] ? __hrtimer_init+0xb0/0xb0
>> [ 1626.609331] ? _raw_spin_unlock_irq+0xa/0x20
>> [ 1626.609334] ? ep_poll+0x26c/0x4a0
>> [ 1626.609337] ? tcp_tsq_write.part.54+0xa0/0xa0
>> [ 1626.609339] ? release_sock+0x43/0x90
>> [ 1626.609341] ? _raw_spin_unlock_bh+0xa/0x20
>> [ 1626.609342] __sys_sendmsg+0x47/0x80
>> [ 1626.609347] do_syscall_64+0x5f/0x1c0
>> [ 1626.609349] ? prepare_exit_to_usermode+0x75/0xa0
>> [ 1626.609351] entry_SYSCALL_64_after_hwframe+0x44/0xa9
>>
>> This patch adds a new prctl command that daemons can use after they have
>> done their initial setup, and before they start to do allocations that
>> are in the IO path. It sets the PF_MEMALLOC_NOIO and PF_LESS_THROTTLE
>> flags so both userspace block and FS threads can use it to avoid the
>> allocation recursion and try to prevent from being throttled while
>> writing out data to free up memory.
>>
>> Signed-off-by: Mike Christie <mchristi@redhat.com>
>> Acked-by: Michal Hocko <mhocko@suse.com>
>> Tested-by: Masato Suzuki <masato.suzuki@wdc.com>
>> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
>
> I suppose this patch should be routed through MM tree, so, CCing Andrew.
>

Andrew and other mm/storage developers,

Do I need to handle anything else for this patch, or are there any other
concerns? Is this maybe something we want to talk about at a quick LSF
session?

I have retested it with Linus's current tree. It still applies cleanly
(just some offsets), and fixes the problem described above we have been
hitting.

\
 
 \ /
  Last update: 2020-01-24 17:23    [W:0.062 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site