lkml.org 
[lkml]   [2020]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 05/56] ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes
Date
From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit 81cc0877840f72210e809bbedd6346d686560fc1 ]

PERST# line in the PCIE connector is driven by the host mode and not
EP mode. The gpios property here is used for driving the PERST# line.
Remove gpios property from all endpoint device tree nodes.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/am571x-idk.dts | 4 ----
arch/arm/boot/dts/am572x-idk-common.dtsi | 4 ----
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 4 ----
3 files changed, 12 deletions(-)

diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 6bebedfc0f35a..9f99ecc6890cd 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -93,10 +93,6 @@
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};

-&pcie1_ep {
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
&mmc1 {
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
index 784639ddf4513..8a7d34c8ae115 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -71,10 +71,6 @@
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};

-&pcie1_ep {
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index d53532b479475..872382bd043f8 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -550,10 +550,6 @@
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};

-&pcie1_ep {
- gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
&mcasp3 {
#sound-dai-cells = <0>;
assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
--
2.20.1
\
 
 \ /
  Last update: 2020-01-24 15:32    [W:0.157 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site