lkml.org 
[lkml]   [2020]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: defconfig: Enable Texas Instruments UDMA driver
Date
The UDMA driver is used on K3 platforms (am654 and j721e).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
Hi,

The drivers for UDMA are already in linu-next and the DT patches are going to be
also heading for 5.6.
The only missing piece is to enable the drivers in defconfig so clients can use
the DMA.

Regards,
Peter

arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 4631a1190719..a325a296d94c 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -698,6 +698,7 @@ CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
CONFIG_RCAR_DMAC=y
CONFIG_RENESAS_USB_DMAC=m
+CONFIG_TI_K3_UDMA=y
CONFIG_VFIO=y
CONFIG_VFIO_PCI=y
CONFIG_VIRTIO_PCI=y
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2020-01-24 10:25    [W:0.062 / U:1.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site