lkml.org 
[lkml]   [2020]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/2] hwmon: (adt7475) Added attenuator bypass support
Date
The ADT7473 and ADT7475 support bypassing voltage input attenuators on
voltage input 1 and the ADT7476 and ADT7490 additionally support
bypassing voltage input attenuators on voltage inputs 0, 3, and 4. This
can be useful to improve measurement resolution when measuring voltages
0 V - 2.25 V.

This patch adds 4 optional devicetree properties to the adt7475
driver, each setting the attenuator bypass (or clearing) on a
specific voltage input.

* v5
- modified adt7475.yaml to remove dt_binding_check errors
- made various alignment fixes to adt7475.c to improve style.
- renamed function modify_config_from_dts_prop to modify_config
- changed return type of function modify_config to void
- function modify_config error return code modified no longer override
the dependent functions i2c_smbus_write_byte_data error.
- renamed function load_all_bypass_attenuators to load_attenuators
- in function load_attenuators the two local variables config2_copy
and config4_copy have been combined into one: conf_copy.

* v4
- fixed a small error in file adt7475.yaml (duplicate property names).

* v3
- removed the functionality to set the global attenuator bypass.
- added functionality to allow bypassing voltage input 1 on the
ADT7473 and ADT7475.
- added DTS definition file adt7475.yaml and 4 new properties.
- added the previousely missing newline character to the end of
file adt7475.c.

* v2
- removed sysfs changes from patch
- removed adt7475_write macro from patch and replaced it by using
the i2c_smbus_write_byte_data function directly in code.
- removed config4_attenuate_index function from patch and replaced it
by modifying the function load_individual_bypass_attenuators
to use hard coded bit values.
- modified function load_individual_bypass_attenuators to use 4 if
statements, one for each voltage input, replacing the for loop.
- modified function adt7475_probe to check the device is a ADT7476 or
ADT7490 (other devices do not support bypassing all or
individual attenuators), and only then set the relevant bits.
- added new file adt7475.txt to document the new devicetree properties.
- removed c++ style comments.

Logan Shaw (2):
hwmon: (adt7475) Added attenuator bypass support
dt-bindings: hwmon: (adt7475) Added missing adt7475 doccumentation

.../devicetree/bindings/hwmon/adt7475.yaml | 95 +++++++++++++++++++
drivers/hwmon/adt7475.c | 68 +++++++++++++
2 files changed, 163 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/adt7475.yaml

--
2.25.0

\
 
 \ /
  Last update: 2020-01-23 23:06    [W:0.037 / U:0.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site