Messages in this thread | | | Subject | Re: [PATCH 1/3] dt-bindings: net: can: m_can: Add Documentation for stb-gpios | From | Faiz Abbas <> | Date | Thu, 23 Jan 2020 13:09:41 +0530 |
| |
Hi,
On 22/01/20 8:04 pm, Dan Murphy wrote: > Sekhar > > On 1/22/20 8:24 AM, Sekhar Nori wrote: >> On 22/01/20 7:05 PM, Dan Murphy wrote: >>> Faiz >>> >>> On 1/22/20 2:03 AM, Faiz Abbas wrote: >>>> The CAN transceiver on some boards has an STB pin which is >>>> used to control its standby mode. Add an optional property >>>> stb-gpios to toggle the same. >>>> >>>> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> >>>> Signed-off-by: Sekhar Nori <nsekhar@ti.com> >>>> --- >>>> Documentation/devicetree/bindings/net/can/m_can.txt | 2 ++ >>>> 1 file changed, 2 insertions(+) >>>> >>>> diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt >>>> b/Documentation/devicetree/bindings/net/can/m_can.txt >>>> index ed614383af9c..cc8ba3f7a2aa 100644 >>>> --- a/Documentation/devicetree/bindings/net/can/m_can.txt >>>> +++ b/Documentation/devicetree/bindings/net/can/m_can.txt >>>> @@ -48,6 +48,8 @@ Optional Subnode: >>>> that can be used for CAN/CAN-FD modes. See >>>> >>>> Documentation/devicetree/bindings/net/can/can-transceiver.txt >>>> for details. >>>> +stb-gpios : gpio node to toggle the STB (standby) signal on >>>> the transceiver >>>> + >>> The m_can.txt is for the m_can framework. If this is specific to the >>> platform then it really does not belong here. >>> >>> If the platform has specific nodes then maybe we need a >>> m_can_platform.txt binding for specific platform nodes. But I leave >>> that decision to Rob. >> Since this is transceiver enable, should this not be in >> Documentation/devicetree/bindings/net/can/can-transceiver.txt? >
The transceiver node is just a node without an associated device. I had tried to convert it to a phy implementation but that idea got shot down here:
https://lore.kernel.org/patchwork/patch/1006238/
Thanks, Faiz
| |