lkml.org 
[lkml]   [2020]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 24/28] docs: i2c: old-module-parameters: clarify this is for obsolete kernels
Date
This section applies only to code for very old kernels. Avoid people
reading this unnecessarily.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
---
Documentation/i2c/old-module-parameters.rst | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/Documentation/i2c/old-module-parameters.rst b/Documentation/i2c/old-module-parameters.rst
index 1a18e2b0f593..92a403d21a62 100644
--- a/Documentation/i2c/old-module-parameters.rst
+++ b/Documentation/i2c/old-module-parameters.rst
@@ -2,6 +2,11 @@
I2C device driver binding control from user-space
=================================================

+.. NOTE::
+ Note: this section is only relevant if you are handling some old code
+ found in kernel 2.6. If you work with more recent kernels, you can
+ safely skip this section.
+
Up to kernel 2.6.32, many I2C drivers used helper macros provided by
<linux/i2c.h> which created standard module parameters to let the user
control how the driver would probe I2C buses and attach to devices. These
--
2.25.0
\
 
 \ /
  Last update: 2020-01-23 15:59    [W:0.561 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site