lkml.org 
[lkml]   [2020]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 12/28] docs: i2c: smbus-protocol: properly name start and stop conditions
Date
In I2C there is no such thing as a "start bit" or a "stop bit". Use the
proper naming: "start condition" and "stop condition".

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
---
Documentation/i2c/smbus-protocol.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
index 1600b09ec0be..8510eeda1dd0 100644
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -35,8 +35,8 @@ Key to symbols
==============

=============== =============================================================
-S (1 bit) : Start bit
-P (1 bit) : Stop bit
+S : Start condition
+P : Stop condition
Rd/Wr (1 bit) : Read/Write bit. Rd equals 1, Wr equals 0.
A, NA (1 bit) : Accept and reverse accept bit.
Addr (7 bits): I2C 7 bit address. Note that this can be expanded as usual to
--
2.25.0
\
 
 \ /
  Last update: 2020-01-23 14:55    [W:0.168 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site