lkml.org 
[lkml]   [2020]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 22/22] clk: tegra: Remove audio clocks configuration from clock driver
From
Date
21.01.2020 19:19, Sowjanya Komatineni пишет:
>
> On 1/19/20 7:04 AM, Dmitry Osipenko wrote:
>> External email: Use caution opening links or attachments
>>
>>
>> 14.01.2020 10:24, Sowjanya Komatineni пишет:
>>
>> [snip]
>>
>>> diff --git a/drivers/clk/tegra/clk-tegra30.c
>>> b/drivers/clk/tegra/clk-tegra30.c
>>> index 5732fdbe20db..53d1c48532ae 100644
>>> --- a/drivers/clk/tegra/clk-tegra30.c
>>> +++ b/drivers/clk/tegra/clk-tegra30.c
>>> @@ -1221,9 +1221,8 @@ static struct tegra_clk_init_table init_table[]
>>> __initdata = {
>>>        { TEGRA30_CLK_UARTC, TEGRA30_CLK_PLL_P, 408000000, 0 },
>>>        { TEGRA30_CLK_UARTD, TEGRA30_CLK_PLL_P, 408000000, 0 },
>>>        { TEGRA30_CLK_UARTE, TEGRA30_CLK_PLL_P, 408000000, 0 },
>>> -     { TEGRA30_CLK_PLL_A, TEGRA30_CLK_CLK_MAX, 564480000, 1 },
>>> -     { TEGRA30_CLK_PLL_A_OUT0, TEGRA30_CLK_CLK_MAX, 11289600, 1 },
>>> -     { TEGRA30_CLK_EXTERN1, TEGRA30_CLK_PLL_A_OUT0, 0, 1 },
>>> +     { TEGRA30_CLK_PLL_A, TEGRA30_CLK_CLK_MAX, 564480000, 0 },
>>> +     { TEGRA30_CLK_PLL_A_OUT0, TEGRA30_CLK_CLK_MAX, 11289600, 0 },
>>>        { TEGRA30_CLK_I2S0, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0 },
>>>        { TEGRA30_CLK_I2S1, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0 },
>>>        { TEGRA30_CLK_I2S2, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0 },
>>>
>> What about to use the assigned-clock-rates in device-tree and thus to
>> remove those PLL_A entries?
>
> Yes clock rates can be used and also PLL rate is set based on sample
> rate during hw_params. So this can be removed.
>
> But PLLA clock rates are not related to this patch series and also
> changing this needs audio function testing across all platforms and
> currently we don't have audio functional tests in place for older
> platforms.
>
> All audio clocks proper fixes and cleanup b/w clock driver and audio
> driver will be done separately.

If there are real plans to make sound driver to drive the PLLA rate,
then indeed should be fine to keep it as-is for now.

\
 
 \ /
  Last update: 2020-01-21 17:58    [W:0.388 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site