lkml.org 
[lkml]   [2020]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/5] vDPA: introduce vDPA bus
On Tue, Jan 21, 2020 at 12:00:57PM +0800, Jason Wang wrote:
>
> On 2020/1/21 上午1:49, Jason Gunthorpe wrote:
> > On Mon, Jan 20, 2020 at 04:43:53PM +0800, Jason Wang wrote:
> > > This is similar to the design of platform IOMMU part of vhost-vdpa. We
> > > decide to send diffs to platform IOMMU there. If it's ok to do that in
> > > driver, we can replace set_map with incremental API like map()/unmap().
> > >
> > > Then driver need to maintain rbtree itself.
> > I think we really need to see two modes, one where there is a fixed
> > translation without dynamic vIOMMU driven changes and one that
> > supports vIOMMU.
>
>
> I think in this case, you meant the method proposed by Shahaf that sends
> diffs of "fixed translation" to device?
>
> It would be kind of tricky to deal with the following case for example:
>
> old map [4G, 16G) new map [4G, 8G)
>
> If we do
>
> 1) flush [4G, 16G)
> 2) add [4G, 8G)
>
> There could be a window between 1) and 2).
>
> It requires the IOMMU that can do
>
> 1) remove [8G, 16G)
> 2) flush [8G, 16G)
> 3) change [4G, 8G)
>
> ....

Basically what I had in mind is something like qemu memory api

0. begin
1. remove [8G, 16G)
2. add [4G, 8G)
3. commit

Anyway, I'm fine with a one-shot API for now, we can
improve it later.

> >
> > There are different optimization goals in the drivers for these two
> > configurations.
> >
> > > > If the first one, then I think memory hotplug is a heavy flow
> > > > regardless. Do you think the extra cycles for the tree traverse
> > > > will be visible in any way?
> > > I think if the driver can pause the DMA during the time for setting up new
> > > mapping, it should be fine.
> > This is very tricky for any driver if the mapping change hits the
> > virtio rings. :(
> >
> > Even a IOMMU using driver is going to have problems with that..
> >
> > Jason
>
>
> Or I wonder whether ATS/PRI can help here. E.g during I/O page fault,
> driver/device can wait for the new mapping to be set and then replay the
> DMA.
>
> Thanks
>


--
MST

\
 
 \ /
  Last update: 2020-01-21 06:48    [W:0.242 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site