lkml.org 
[lkml]   [2020]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [PATCH v3 2/3] dt-binding: hwmon: Add documentation for ADM1177
    On Tue, Jan 7, 2020 at 4:58 AM Beniamin Bia <beniamin.bia@analog.com> wrote:
    >
    > Documentation for ADM1177 was added.
    >
    > Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
    > Reviewed-by: Rob Herring <robh@kernel.org>
    > ---
    > Changes in v3:
    > -nothing changed
    >
    > .../bindings/hwmon/adi,adm1177.yaml | 66 +++++++++++++++++++
    > 1 file changed, 66 insertions(+)
    > create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml

    This is breaking linux-next. Please fix and run 'make dt_binding_check':

    Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml: while
    scanning a block scalar
    in "<unicode string>", line 51, column 5
    found a tab character where an indentation space is expected
    in "<unicode string>", line 61, column 1
    >
    > diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
    > new file mode 100644
    > index 000000000000..65ef95328bc6
    > --- /dev/null
    > +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
    > @@ -0,0 +1,66 @@
    > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
    > +%YAML 1.2
    > +---
    > +$id: http://devicetree.org/schemas/hwmon/adi,adm1177.yaml#
    > +$schema: http://devicetree.org/meta-schemas/core.yaml#
    > +
    > +title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
    > +
    > +maintainers:
    > + - Michael Hennerich <michael.hennerich@analog.com>
    > + - Beniamin Bia <beniamin.bia@analog.com>
    > +
    > +description: |
    > + Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
    > + https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf
    > +
    > +properties:
    > + compatible:
    > + enum:
    > + - adi,adm1177
    > +
    > + reg:
    > + maxItems: 1
    > +
    > + avcc-supply:
    > + description:
    > + Phandle to the Avcc power supply
    > +
    > + shunt-resistor-micro-ohms:
    > + description:
    > + The value of curent sense resistor in microohms. If not provided,
    > + the current reading and overcurrent alert is disabled.
    > +
    > + adi,shutdown-threshold-microamp:
    > + description:
    > + Specifies the current level at which an over current alert occurs.
    > + If not provided, the overcurrent alert is configured to max ADC range
    > + based on shunt-resistor-micro-ohms.
    > +
    > + adi,vrange-high-enable:
    > + description:
    > + Specifies which internal voltage divider to be used. A 1 selects
    > + a 7:2 voltage divider while a 0 selects a 14:1 voltage divider.
    > + type: boolean
    > +
    > +required:
    > + - compatible
    > + - reg
    > +
    > +examples:
    > + - |
    > + #include <dt-bindings/gpio/gpio.h>
    > + #include <dt-bindings/interrupt-controller/irq.h>
    > + i2c0 {
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > +
    > + pwmon@5a {
    > + compatible = "adi,adm1177";
    > + reg = <0x5a>;
    > + shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
    > + adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
    > + adi,vrange-high-enable;
    > + };
    > + };
    > +...
    > --
    > 2.17.1
    >

    \
     
     \ /
      Last update: 2020-01-13 18:00    [W:2.274 / U:0.020 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site