lkml.org 
[lkml]   [2020]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH platform-next v3 06/11] Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
Date
Add documentation for the new attributes for:
- Exposing reset causes types asserted by: platform reset, SoC reset,
AC power failure, software power off request.
- Setting and removing system VPD (EEPROM) hardware write protection.
- Voltage regulator devices configuration update status and firmware
version.
- Setting PCIe ASIC reset to disable or enable state during PCIe root
complex reset.
- System static topology identification, like system's static I2C
topology, number and type of FPGA devices within the system and so on.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
---
v1-v2:
Changes added by Vadim:
- Change "Date" to "January 2020".
v3-v4:
Comments pointed out by Andy:
- Drop blank line between "What" and "Date".
- Start each section with "What" keyword.
---
Documentation/ABI/stable/sysfs-driver-mlxreg-io | 63 +++++++++++++++++++++++++
1 file changed, 63 insertions(+)

diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
index eb6db7382ae3..b0d90cc696a8 100644
--- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -143,3 +143,66 @@ Description: These files show the system reset cause, as following:
only last reset cause.

The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: These files show system static topology identification
+ like system's static I2C topology, number and type of FPGA
+ devices within the system and so on.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: These files show the system reset causes, as following: reset
+ due to AC power failure, reset invoked from software by
+ assertion reset signal through CPLD. reset caused by signal
+ asserted by SOC through ACPI register, reset invoked from
+ software by assertion power off signal through CPLD.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: This file allows to retain ASIC up during PCIe root complex
+ reset, when attribute is set 1.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: This file allows to overwrite system VPD hardware wrtie
+ protection when attribute is set 1.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: This file exposes the configuration update status of burnable
+ voltage regulator devices. The status values are as following:
+ 0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: This file exposes the firmware version of burnable voltage
+ regulator devices.
+
+ The file is read only.
--
2.11.0
\
 
 \ /
  Last update: 2020-01-13 17:29    [W:0.178 / U:1.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site