lkml.org 
[lkml]   [2019]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] cpufreq: ti-cpufreq: Add support for AM3517
From
Date
Hi,

> Am 09.09.2019 um 20:17 schrieb Adam Ford <aford173@gmail.com>:
>
> On Mon, Sep 9, 2019 at 1:13 PM H. Nikolaus Schaller <hns@goldelico.com> wrote:
>>
>> Hi Adam,
>>
>>> Am 09.09.2019 um 17:45 schrieb Adam Ford <aford173@gmail.com>:
>>>
>>> The AM3517 only lists 600MHz @ 1.2V, but the revister values for
>>
>> a small typo...
>>
>> s/revister/register/
>>
>>> 0x4830A204 = 1b86 802f, it seems like am3517 might be a derivative
>>> of the omap36 which has OPPs would be OPP50 (300 MHz) and OPP100
>>> (600 MHz).
>>>
>>> This patch simply enable adds the am3517 to the compatible table
>>> using the omap3630 structure instead of the 3430.
>>>
>>> Signed-off-by: Adam Ford <aford173@gmail.com>
>>>
>>> diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
>>> index f2f58d689320..6b69fb1d6bdf 100644
>>> --- a/drivers/cpufreq/ti-cpufreq.c
>>> +++ b/drivers/cpufreq/ti-cpufreq.c
>>> @@ -270,6 +270,7 @@ static int ti_cpufreq_setup_syscon_register(struct ti_cpufreq_data *opp_data)
>>>
>>> static const struct of_device_id ti_cpufreq_of_match[] = {
>>> { .compatible = "ti,am33xx", .data = &am3x_soc_data, },
>>> + { .compatible = "ti,am3517", .data = &omap36xx_soc_data, },
>>> { .compatible = "ti,am43", .data = &am4x_soc_data, },
>>> { .compatible = "ti,dra7", .data = &dra7_soc_data },
>>> { .compatible = "ti,omap34xx", .data = &omap34xx_soc_data, },
>>> --
>>> 2.17.1
>>>
>>
>> Looks good to me.
>>
>> Should I include your two patches to my patch set (and resend)?
>> Or should we keep them separated?
>
> Go ahead and take credit for them. I just did what you told me to do
> and tested them.

Well, you are still the Author, the one who wrote down the ideas :)
I think git will even keep the author name untouched.

> Go ahead and mark it as Tested-by with my name.

Best is to keep your Signed-Off + mine and add a tested-by as well :)

BR and thanks,
Nikolaus

\
 
 \ /
  Last update: 2019-09-09 20:22    [W:0.321 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site