lkml.org 
[lkml]   [2019]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] staging: dt-bindings: wilc1000: add optional rtc_clk property
Date
From: Eugen Hristev <eugen.hristev@microchip.com>

Add bindings for optional rtc clock pin.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
---

Changes in v2:
- none

drivers/staging/wilc1000/microchip,wilc1000,sdio.txt | 8 +++++++-
drivers/staging/wilc1000/microchip,wilc1000,spi.txt | 8 ++++++++
2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/wilc1000/microchip,wilc1000,sdio.txt b/drivers/staging/wilc1000/microchip,wilc1000,sdio.txt
index 4f7d1c2..da52359 100644
--- a/drivers/staging/wilc1000/microchip,wilc1000,sdio.txt
+++ b/drivers/staging/wilc1000/microchip,wilc1000,sdio.txt
@@ -10,7 +10,9 @@ Required properties:

Optional:
- bus-width : Number of data lines wired up the slot. Default 1 bit.
-
+- rtc_clk : Clock connected on the rtc clock line. Must be assigned
+ a frequency with assigned-clocks property, and must be
+ connected to a clock provider.

Examples:
mmc1: mmc@fc000000 {
@@ -24,6 +26,10 @@ mmc1: mmc@fc000000 {
wilc_sdio@0 {
compatible = "microchip,wilc1000-sdio";
irq-gpios = <&pioC 27 0>;
+ clocks = <&pck1>;
+ clock-names = "rtc_clk";
+ assigned-clocks = <&pck1>;
+ assigned-clock-rates = <32768>;
status = "okay";
reg = <0>;
bus-width = <4>;
diff --git a/drivers/staging/wilc1000/microchip,wilc1000,spi.txt b/drivers/staging/wilc1000/microchip,wilc1000,spi.txt
index 87db87b..3423693 100644
--- a/drivers/staging/wilc1000/microchip,wilc1000,spi.txt
+++ b/drivers/staging/wilc1000/microchip,wilc1000,spi.txt
@@ -9,6 +9,10 @@ Required properties:
- reg : Chip select address of device
- irq-gpios : Connect to a host IRQ

+Optional:
+- rtc_clk : Clock connected on the rtc clock line. Must be assigned
+ a frequency with assigned-clocks property, and must be
+ connected to a clock provider.

Examples:

@@ -21,6 +25,10 @@ spi1: spi@fc018000 {
spi-max-frequency = <48000000>;
reg = <0>;
irq-gpios = <&pioC 27 0>;
+ clocks = <&pck1>;
+ clock-names = "rtc_clk";
+ assigned-clocks = <&pck1>;
+ assigned-clock-rates = <32768>;
status = "okay";
};
};
--
2.7.4
\
 
 \ /
  Last update: 2019-09-09 16:12    [W:0.035 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site