lkml.org 
[lkml]   [2019]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] net: phy: dp83867: Add documentation for SGMII mode type
Date
Add documentation of ti,sgmii-ref-clock-output-enable
which can be used to select SGMII mode type (4 or 6-wire).

Signed-off-by: Vitaly Gaiduk <vitaly.gaiduk@cloudbear.ru>
---
Changes in v2:
- renamed ti,sgmii-type to ti,sgmii-ref-clock-output-enable
and extended description

Documentation/devicetree/bindings/net/ti,dp83867.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
index db6aa3f..c98c682 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.txt
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt
@@ -37,6 +37,10 @@ Optional property:
for applicable values. The CLK_OUT pin can also
be disabled by this property. When omitted, the
PHY's default will be left as is.
+ - ti,sgmii-ref-clock-output-enable - This denotes the fact which
+ SGMII configuration is used (4 or 6-wire modes).
+ Some MACs work with differential SGMII clock.
+ See data manual for details.

Note: ti,min-output-impedance and ti,max-output-impedance are mutually
exclusive. When both properties are present ti,max-output-impedance
--
2.7.4
\
 
 \ /
  Last update: 2019-09-09 13:04    [W:0.375 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site