lkml.org 
[lkml]   [2019]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt-bindings: net: dwmac: document 'mac-mode' property
Date
This change documents the 'mac-mode' property that was introduced in the
'stmmac' driver to support passive mode converters that can sit in-between
the MAC & PHY.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
Documentation/devicetree/bindings/net/snps,dwmac.yaml | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index c78be15704b9..ebe4537a7cce 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -112,6 +112,14 @@ properties:
reset-names:
const: stmmaceth

+ mac-mode:
+ maxItems: 1
+ description:
+ The property is identical to 'phy-mode', and assumes that there is mode
+ converter in-between the MAC & PHY (e.g. GMII-to-RGMII). This converter
+ can be passive (no SW requirement), and requires that the MAC operate
+ in a different mode than the PHY in order to function.
+
snps,axi-config:
$ref: /schemas/types.yaml#definitions/phandle
description:
--
2.20.1
\
 
 \ /
  Last update: 2019-09-06 15:04    [W:0.188 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site