lkml.org 
[lkml]   [2019]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC v2 3/3] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap36xx
Hi,

* H. Nikolaus Schaller <hns@goldelico.com> [190904 08:54]:
> According to omap.txt bindings documentation, matching the ti-cpufreq driver needs
> to specify explicitly if a board uses an omap3430 or omap36xx chip.
>
> This needs to add ti,omap3430 to most omap34xx boards and replace ti,omap3630
> by ti,omap36xx for some omap36xx boards (most others already have done it right).
>
> We also clean up some instances of missing ti,am3517 so that we can rely on
> seeing either one of:
>
> ti,am3517
> ti,omap34xx
> ti,omap36xx
>
> in addition to ti,omap3.

Please set up things to use ti,omap3630 in addition to ti,omap36xx
for compatible to avoid churning the same files later.

> diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
> --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
> +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
> @@ -9,5 +9,5 @@
>
> / {
> model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
> - compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
> + compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap36xx", "ti,omap3";
> };

So just make this:

compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap36xx", "ti,omap3";

And so on. It's fine to use ti,omap3630 for 37xx too as they're the same.

> diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
> index 9a5fde2d9bce..9947574bd0f8 100644
> --- a/arch/arm/boot/dts/omap3-ldp.dts
> +++ b/arch/arm/boot/dts/omap3-ldp.dts
> @@ -10,7 +10,7 @@
>
> / {
> model = "TI OMAP3430 LDP (Zoom1 Labrador)";
> - compatible = "ti,omap3-ldp", "ti,omap3";
> + compatible = "ti,omap3-ldp", "ti,omap34xx, "ti,omap3";

This fails to compile, it's missing a '"' for ti,omap34xx. And here too,
please update to use:

compatible = "ti,omap3-ldp", "ti,omap3430", "ti,omap34xx", "ti,omap3";

And again it's fine to add "ti,omap3430" for 3530 variants.

Regards,

Tony

\
 
 \ /
  Last update: 2019-09-05 16:28    [W:0.181 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site