lkml.org 
[lkml]   [2019]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dmaengine: sprd: Fix the DMA link-list configuration
On 30-08-19, 15:37, Baolin Wang wrote:
> For the Spreadtrum DMA link-list mode, when the DMA engine got a slave
> hardware request, which will trigger the DMA engine to load the DMA
> configuration from the link-list memory automatically. But before the
> slave hardware request, the slave will get an incorrect residue due
> to the first node used to trigger the link-list was configured as the
> last source address and destination address.
>
> Thus we should make sure the first node was configured the start source
> address and destination address, which can fix this issue.

Applied, thanks

--
~Vinod

\
 
 \ /
  Last update: 2019-09-04 07:57    [W:0.024 / U:2.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site