lkml.org 
[lkml]   [2019]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC 4/5] ARM: dts: omap3-n950-n9: remove opp-v1 table
From
Date

> Am 03.09.2019 um 04:36 schrieb Viresh Kumar <viresh.kumar@linaro.org>:
>
> On 02-09-19, 12:55, H. Nikolaus Schaller wrote:
>> With opp-v2 in omap36xx.dtsi and ti-cpufreq driver the
>> 1GHz capability is automatically detected.
>>
>> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
>> ---
>> arch/arm/boot/dts/omap3-n950-n9.dtsi | 7 -------
>> 1 file changed, 7 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
>> index 5441e9ffdbb4..e98b0c615f19 100644
>> --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
>> +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
>> @@ -11,13 +11,6 @@
>> cpus {
>> cpu@0 {
>> cpu0-supply = <&vcc>;
>> - operating-points = <
>> - /* kHz uV */
>> - 300000 1012500
>> - 600000 1200000
>> - 800000 1325000
>> - 1000000 1375000
>> - >;
>> };
>> };
>
> This should be merged with 2/5 ?

Well, it bloats 2/5.

What I hope (I can't test) is that this opp-v1 table
is ignored if an opp-v2 table exists. So that it can be
removed by a separate follow-up patch.

BR,
Nikolaus
\
 
 \ /
  Last update: 2019-09-03 08:03    [W:0.081 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site