lkml.org 
[lkml]   [2019]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 4/4] edac: Add support for Amazon's Annapurna Labs L2 EDAC
Date
On 03.09.19 11:28:41, Hawa, Hanna wrote:
> On 9/3/2019 10:27 AM, Robert Richter wrote:
> > On 15.07.19 16:24:09, Hanna Hawa wrote:
> > > Adds support for Amazon's Annapurna Labs L2 EDAC driver to detect and
> > > report L2 errors.
> > >
> > > Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
> > > ---
> > > MAINTAINERS | 6 ++
> > > drivers/edac/Kconfig | 8 ++
> > > drivers/edac/Makefile | 1 +
> > > drivers/edac/al_l2_edac.c | 187 ++++++++++++++++++++++++++++++++++++++++++++++
> > > 4 files changed, 202 insertions(+)
> > > create mode 100644 drivers/edac/al_l2_edac.c
> >
> > From a brief look at it, it seems some of my comments from 2/4 apply
> > here too. Please look through it.
>
> Thanks for your review, will look and fix on top of v5.

I have later seen your newer versions posted which haven't made it
into my inbox. But looking at the changelog my comments are still
valid. Thanks for addressing them.

From the changelog:

"Changes since v1:
-----------------
- Split into two drivers"

This is good, but recent practice is also to have all the drivers for
the same piece of hardware in a single file, see e.g. thunderx_edac.c.
I don't know how detailed this was discussed already, but I would
prefer to join the code.

-Robert

\
 
 \ /
  Last update: 2019-09-03 10:47    [W:0.550 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site