Messages in this thread | | | Subject | Re: [PATCH v3 0/7] add support USB for MT8183 | From | Chunfeng Yun <> | Date | Wed, 4 Sep 2019 09:54:27 +0800 |
| |
Hi Greg,
Please don't try to pick up this series, the dependent ones are still under public review, I'll fix build warning and send out new version after the dependent ones are applied Sorry for inconvenience
Thanks
On Fri, 2019-08-30 at 15:40 +0800, Chunfeng Yun wrote: > This series support USB DRD controller and enable it's remote > wakeup functoin for MT8183, they depend on the following > series patches: > > 1. this series add support MT6358 PMIC > [v5,01/10] mfd: mt6397: clean up code > https://patchwork.kernel.org/patch/11110487/ > > 2. this series add support pericfg syscon > [v2,1/2] dt-bindings: clock: mediatek: add pericfg for MT8183 > https://patchwork.kernel.org/patch/11118183/ > > 3. add property mediatek,discth for tphy > [06/11] phy: phy-mtk-tphy: add a property for disconnect threshold > https://patchwork.kernel.org/patch/11110695/ > > v3 changes: > 1. changes micros define > 2. remove #reset-cell > 3. update dependent series > > v2 changes: > add patch [7/7] > > Chunfeng Yun (7): > dt-bindings: usb: mtu3: support USB wakeup for MT8183 > dt-bindings: usb: mtk-xhci: support USB wakeup for MT8183 > usb: mtu3: support ip-sleep wakeup for MT8183 > usb: mtk-xhci: support ip-sleep wakeup for MT8183 > arm64: dts: mt8183: add usb and phy nodes > arm64: dts: mt8183: enable USB remote wakeup > arm64: dts: mt8183: tune disconnect threshold of u2phy > > .../bindings/usb/mediatek,mtk-xhci.txt | 1 + > .../devicetree/bindings/usb/mediatek,mtu3.txt | 1 + > arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 23 +++++++ > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 63 +++++++++++++++++++ > drivers/usb/host/xhci-mtk.c | 14 ++++- > drivers/usb/mtu3/mtu3_host.c | 14 ++++- > 6 files changed, 114 insertions(+), 2 deletions(-) >
| |