lkml.org 
[lkml]   [2019]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCHv1 0/3] Odroid c2 missing regulator linking
Hi Anand,

On Fri, Aug 30, 2019 at 11:34 AM Anand Moon <linux.amoon@gmail.com> wrote:
[...]
> > SCPI works fine on all tested devices, except Odroid-C2, because Hardkernel left
> > the > 1.5GHz freq in the initial SCPI tables loaded by the BL2, i.e. packed with U-Boot.
> > Nowadays they have removed the bad frequencies, but still some devices uses the old
> > bootloader.
> >
> > But in the SCPI case we trust the table returned by the firmware and use it as-in,
> > and there is no (simple ?) way to override the table and set a max frequency.
> >
> > This is why we disabled SCPI.
> >
> > See https://patchwork.kernel.org/patch/9500175/
>
> I have quickly enable this on my board and here the cpufreq info
[...]
> Almost all the test case pass with this one as off now.
I suggest to send an RFC patch to (re-)enable DVFS on Odroid-C2
I find it easy to miss a DVFS discussion inside a "missing regulator" series

with a separate patch you can also get feedback from other Odroid-C2
owners who can help testing
coincidence or not: on Friday someone asked in the #linux-amlogic IRC
channel why Odroid-C2 didn't have DVFS enabled and what to do about it


Martin

\
 
 \ /
  Last update: 2019-09-03 21:09    [W:0.138 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site