lkml.org 
[lkml]   [2019]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework
    From
    Date
    Dan,

    On 9/25/19 7:46 PM, Dan Murphy wrote:
    > Update the lp5523 to allow the use of the multi color framework.
    >
    > Signed-off-by: Dan Murphy <dmurphy@ti.com>
    > ---
    > drivers/leds/Kconfig | 1 +
    > drivers/leds/leds-lp5523.c | 13 ++
    > drivers/leds/leds-lp55xx-common.c | 150 ++++++++++++++++++----
    > drivers/leds/leds-lp55xx-common.h | 11 ++
    > include/linux/platform_data/leds-lp55xx.h | 6 +
    > 5 files changed, 157 insertions(+), 24 deletions(-)
    >
    > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
    > index 84f60e35c5ee..dc3d9f2194cd 100644
    > --- a/drivers/leds/Kconfig
    > +++ b/drivers/leds/Kconfig
    > @@ -377,6 +377,7 @@ config LEDS_LP50XX
    > config LEDS_LP55XX_COMMON
    > tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
    > depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
    > + depends on LEDS_CLASS_MULTI_COLOR && OF
    > select FW_LOADER
    > select FW_LOADER_USER_HELPER
    > help
    > diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
    > index d0b931a136b9..8b2cdb98fed6 100644
    > --- a/drivers/leds/leds-lp5523.c
    > +++ b/drivers/leds/leds-lp5523.c
    > @@ -791,6 +791,18 @@ static ssize_t store_master_fader_leds(struct device *dev,
    > return ret;
    > }
    >
    > +static int lp5523_led_intensity(struct lp55xx_led *led, int chan_num)

    Why do we need this function? brightness op will not suffice?

    > +{
    > + struct lp55xx_chip *chip = led->chip;
    > + int ret;
    > +
    > + mutex_lock(&chip->lock);
    > + ret = lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + chan_num,
    > + led->brightness);
    > + mutex_unlock(&chip->lock);
    > + return ret;
    > +}
    > +
    > static int lp5523_led_brightness(struct lp55xx_led *led)
    > {
    > struct lp55xx_chip *chip = led->chip;
    > @@ -857,6 +869,7 @@ static struct lp55xx_device_config lp5523_cfg = {
    > .max_channel = LP5523_MAX_LEDS,
    > .post_init_device = lp5523_post_init_device,
    > .brightness_fn = lp5523_led_brightness,
    > + .color_intensity_fn = lp5523_led_intensity,
    > .set_led_current = lp5523_set_led_current,
    > .firmware_cb = lp5523_firmware_loaded,
    > .run_engine = lp5523_run_engine,
    > diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
    > index 44ced02b49f9..0e4b3a9d3047 100644
    > --- a/drivers/leds/leds-lp55xx-common.c
    > +++ b/drivers/leds/leds-lp55xx-common.c
    > @@ -136,9 +136,26 @@ static int lp55xx_set_brightness(struct led_classdev *cdev,
    > {
    > struct lp55xx_led *led = cdev_to_lp55xx_led(cdev);
    > struct lp55xx_device_config *cfg = led->chip->cfg;
    > + int brightness_val[LP55XX_MAX_GROUPED_CHAN];
    > + int ret;
    > + int i;
    > +
    > + if (led->mc_cdev.num_leds > 1) {
    > + led_mc_calc_brightness(&led->mc_cdev,
    > + brightness, brightness_val);
    > + for (i = 0; i < led->mc_cdev.num_leds; i++) {
    > + led->brightness = brightness_val[i];
    > + ret = cfg->color_intensity_fn(led,
    > + led->grouped_channels[i]);

    Now we will have three separate calls for each color component
    (and possibly sleeping on mutex on contention).

    Probably LED mc class use case will need a bit different design.

    Also, instead of grouped_channels we could possibly have

    led_mc_get_color_id(&led->mc_dev, i)

    which would map entry position index to color_id.

    I will stop reviewing here and will continue after taking
    deeper look at this lp55xx design.

    --
    Best regards,
    Jacek Anaszewski

    \
     
     \ /
      Last update: 2019-09-26 00:02    [W:6.596 / U:0.016 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site