lkml.org 
[lkml]   [2019]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 2/3] dt-bindings: Add Logic PD Type 28 display panel
Date
This patch adds documentation of device tree bindings for the WVGA panel
Logic PD Type 28 display.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2: Use YAML instead of TXT for binding

diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
new file mode 100644
index 000000000000..707e2a17c8c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR X11)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ronbo,rb070d30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
+
+properties:
+ compatible:
+ const: logicpd,type28
+
+ power-supply:
+ description: Regulator to provide the supply voltage
+ maxItems: 1
+
+ enable-gpios:
+ description: GPIO pin to enable or disable the panel
+ maxItems: 1
+
+ backlight:
+ description: Backlight used by the panel
+ $ref: "/schemas/types.yaml#/definitions/phandle"
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ lcd0: display {
+ compatible = "logicpd,type28";
+ enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
--
2.17.1
\
 
 \ /
  Last update: 2019-09-23 15:46    [W:0.047 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site