lkml.org 
[lkml]   [2019]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 4/5] clk: meson: meson8b: don't register the XTAL clock when provided via OF
Date
On Sat 21 Sep 2019 at 17:12, Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote:

> The XTAL clock is an actual crystal on the PCB. Thus the meson8b clock
> driver should not register the XTAL clock - instead it should be
> provided via .dts and then passed to the clock controller.
>
> Skip the registration of the XTAL clock if a parent clock is provided
> via OF. Fall back to registering the XTAL clock if this is not the case
> to keep support for old .dtbs.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> drivers/clk/meson/meson8b.c | 12 +++++++++---
> 1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
> index b785b67baf2b..15ec14fde2a0 100644
> --- a/drivers/clk/meson/meson8b.c
> +++ b/drivers/clk/meson/meson8b.c
> @@ -3682,10 +3682,16 @@ static void __init meson8b_clkc_init_common(struct device_node *np,
> meson8b_clk_regmaps[i]->map = map;
>
> /*
> - * register all clks
> - * CLKID_UNUSED = 0, so skip it and start with CLKID_XTAL = 1
> + * always skip CLKID_UNUSED and also skip XTAL if the .dtb provides the
> + * XTAL clock as input.
> */
> - for (i = CLKID_XTAL; i < CLK_NR_CLKS; i++) {
> + if (of_clk_get_parent_count(np))

If we are going for this, I'd prefer if could explicity check for the
clock named "xtal" instead of just checking if DT has clocks.

> + i = CLKID_PLL_FIXED;
> + else
> + i = CLKID_XTAL;
> +
> + /* register all clks */
> + for (; i < CLK_NR_CLKS; i++) {
> /* array might be sparse */
> if (!clk_hw_onecell_data->hws[i])
> continue;
> --
> 2.23.0

\
 
 \ /
  Last update: 2019-09-23 11:32    [W:2.087 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site