lkml.org 
[lkml]   [2019]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 09/13] net: stmmac: ethtool: Let user configure TX coalesce without RIWT
Date
When RX Watchdog is disabled its currently not possible to configure TX
coalesce settings. Let user configure it anyway.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>

---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
.../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 21 +++++++++------------
1 file changed, 9 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 1c450105e5a6..1a768837ca72 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -746,8 +746,15 @@ static int stmmac_set_coalesce(struct net_device *dev,
(ec->tx_max_coalesced_frames_high) || (ec->rate_sample_interval))
return -EOPNOTSUPP;

- if (ec->rx_coalesce_usecs == 0)
- return -EINVAL;
+ if (priv->use_riwt && (ec->rx_coalesce_usecs > 0)) {
+ rx_riwt = stmmac_usec2riwt(ec->rx_coalesce_usecs, priv);
+
+ if ((rx_riwt > MAX_DMA_RIWT) || (rx_riwt < MIN_DMA_RIWT))
+ return -EINVAL;
+
+ priv->rx_riwt = rx_riwt;
+ stmmac_rx_watchdog(priv, priv->ioaddr, priv->rx_riwt, rx_cnt);
+ }

if ((ec->tx_coalesce_usecs == 0) &&
(ec->tx_max_coalesced_frames == 0))
@@ -757,20 +764,10 @@ static int stmmac_set_coalesce(struct net_device *dev,
(ec->tx_max_coalesced_frames > STMMAC_TX_MAX_FRAMES))
return -EINVAL;

- rx_riwt = stmmac_usec2riwt(ec->rx_coalesce_usecs, priv);
-
- if ((rx_riwt > MAX_DMA_RIWT) || (rx_riwt < MIN_DMA_RIWT))
- return -EINVAL;
- else if (!priv->use_riwt)
- return -EOPNOTSUPP;
-
/* Only copy relevant parameters, ignore all others. */
priv->tx_coal_frames = ec->tx_max_coalesced_frames;
priv->tx_coal_timer = ec->tx_coalesce_usecs;
priv->rx_coal_frames = ec->rx_max_coalesced_frames;
- priv->rx_riwt = rx_riwt;
- stmmac_rx_watchdog(priv, priv->ioaddr, priv->rx_riwt, rx_cnt);
-
return 0;
}

--
2.7.4
\
 
 \ /
  Last update: 2019-09-02 10:03    [W:0.210 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site