lkml.org 
[lkml]   [2019]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3] bonding: force enable lacp port after link state recovery for 802.3ad
Date


> -----Original Message-----
> From: Jay Vosburgh [mailto:jay.vosburgh@canonical.com]
> Sent: 2019年9月19日 16:12
> To: zhangsha (A) <zhangsha.zhang@huawei.com>
> Cc: vfalico@gmail.com; andy@greyhouse.net; davem@davemloft.net;
> netdev@vger.kernel.org; linux-kernel@vger.kernel.org; yuehaibing
> <yuehaibing@huawei.com>; hunongda <hunongda@huawei.com>;
> Chenzhendong (alex) <alex.chen@huawei.com>
> Subject: Re: [PATCH v3] bonding: force enable lacp port after link state
> recovery for 802.3ad
>
> zhangsha (A) <zhangsha.zhang@huawei.com> wrote:
>
> >> -----Original Message-----
> >> From: zhangsha (A)
> >> Sent: 2019年9月18日 21:06
> >> To: jay.vosburgh@canonical.com; vfalico@gmail.com;
> >> andy@greyhouse.net; davem@davemloft.net; netdev@vger.kernel.org;
> >> linux-kernel@vger.kernel.org; yuehaibing <yuehaibing@huawei.com>;
> >> hunongda <hunongda@huawei.com>; Chenzhendong (alex)
> >> <alex.chen@huawei.com>; zhangsha (A) <zhangsha.zhang@huawei.com>
> >> Subject: [PATCH v3] bonding: force enable lacp port after link state
> >> recovery for 802.3ad
> >>
> >> From: Sha Zhang <zhangsha.zhang@huawei.com>
> >>
> >> After the commit 334031219a84 ("bonding/802.3ad: fix slave link
> >> initialization transition states") merged, the slave's link status
> >> will be changed to BOND_LINK_FAIL from BOND_LINK_DOWN in the
> following scenario:
> >> - Driver reports loss of carrier and
> >> bonding driver receives NETDEV_DOWN notifier
> >> - slave's duplex and speed is zerod and
> >> its port->is_enabled is cleard to 'false';
> >> - Driver reports link recovery and
> >> bonding driver receives NETDEV_UP notifier;
> >> - If speed/duplex getting failed here, the link status
> >> will be changed to BOND_LINK_FAIL;
> >> - The MII monotor later recover the slave's speed/duplex
> >> and set link status to BOND_LINK_UP, but remains
> >> the 'port->is_enabled' to 'false'.
> >>
> >> In this scenario, the lacp port will not be enabled even its speed
> >> and duplex are valid. The bond will not send LACPDU's, and its state is
> 'AD_STATE_DEFAULTED'
> >> forever. The simplest fix I think is to call
> >> bond_3ad_handle_link_change() in bond_miimon_commit, this function
> >> can enable lacp after port slave speed check.
> >> As enabled, the lacp port can run its state machine normally after link
> recovery.
> >>
> >> Signed-off-by: Sha Zhang <zhangsha.zhang@huawei.com>
> >> ---
> >> drivers/net/bonding/bond_main.c | 3 ++-
> >> 1 file changed, 2 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/net/bonding/bond_main.c
> >> b/drivers/net/bonding/bond_main.c index 931d9d9..76324a5 100644
> >> --- a/drivers/net/bonding/bond_main.c
> >> +++ b/drivers/net/bonding/bond_main.c
> >> @@ -2206,7 +2206,8 @@ static void bond_miimon_commit(struct bonding
> >> *bond)
> >> */
> >> if (BOND_MODE(bond) == BOND_MODE_8023AD &&
> >> slave->link == BOND_LINK_UP)
> >> -
> >> bond_3ad_adapter_speed_duplex_changed(slave);
> >> + bond_3ad_handle_link_change(slave,
> >> + BOND_LINK_UP);
> >> continue;
> >>
> >> case BOND_LINK_UP:
> >
> >Hi, David,
> >I have replied your email for a while, I guess you may miss my email, so I
> resend it.
> >The following link address is the last email, please review the new one again,
> thank you.
> >https://patchwork.ozlabs.org/patch/1151915/
> >
> >Last time, you doubted this is a driver specific problem, I prefer to
> >believe it's not because I find the commit 4d2c0cda, its log says "
> >Some NIC drivers don't have correct speed/duplex settings at the time
> >they send NETDEV_UP notification ...".
> >
> >Anyway, I think the lacp status should be fixed correctly, since
> >link-monitoring (miimon) set SPEED/DUPLEX right here.
>
> I suspect this is going to be related to the concurrent discussion with
> Aleksei, and would like to see the instrumentation results from his tests before
> adding another change to attempt to resolve this.
>
> Also, what device are you using for your testing, and are you able to
> run the instrumentation patch that I provided to Aleksei and provide its results?
>
> -J
>

Yes, I think it's the same problem.
I am using a Huawei hinic card with kernel 4.19 and got the same message and the
weird system mac "00:00:00:00:00:00":
"link status definitely down for interface eth6, disabling it
link status up again after 0 ms for interface eth6"

I will run your instrumentation patch, but maybe I need more times.
In fact, I have tried to reproduce the problem for thousands of times, but never succeeded.

> ---
> -Jay Vosburgh, jay.vosburgh@canonical.com
\
 
 \ /
  Last update: 2019-09-19 14:47    [W:0.209 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site