lkml.org 
[lkml]   [2019]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/3] arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk
Date
Hi, Schrempf

> Hi Anson,
>
> I have a question, that is not directly related to this patch.
> I see that for the usdhc1 and usdhc3 nodes, there is an 'assigned-clock'
> and 'assigned-clock-rates' property but not for usdhc2. The same applies to
> the mx8mq and mx8mn dtsi file.
>
> Is there any reason for this? If not can you fix it?

This patch series is NOT related to 'assigned-clock' or 'assigned-clock-rates'
property, it is just for correcting clock source according to reference manual,
the 'ipg' clock is from system's IPG_ROOT clock according to reference manual CCM
chapter, using DUMMY clock is NOT a good option, the 'ipg' clock is supposed
to be the clock for accessing register, and it should NOT be DUMMY if we know
what exactly the clock source is used.

Thanks,
Anson



\
 
 \ /
  Last update: 2019-09-19 11:33    [W:0.229 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site