lkml.org 
[lkml]   [2019]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/5] ocxl: Tally up the LPC memory on a link & allow it to be mapped
From
Date


Le 19/09/2019 à 06:55, Alastair D'Silva a écrit :
> On Wed, 2019-09-18 at 16:02 +0200, Frederic Barrat wrote:
>>
>> Le 17/09/2019 à 03:42, Alastair D'Silva a écrit :
>>> From: Alastair D'Silva <alastair@d-silva.org>
>>>
>>> Tally up the LPC memory on an OpenCAPI link & allow it to be mapped
>>>
>>> Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
>>> ---
>>> drivers/misc/ocxl/core.c | 9 +++++
>>> drivers/misc/ocxl/link.c | 61
>>> +++++++++++++++++++++++++++++++
>>> drivers/misc/ocxl/ocxl_internal.h | 42 +++++++++++++++++++++
>>> 3 files changed, 112 insertions(+)
>>>
>>> diff --git a/drivers/misc/ocxl/core.c b/drivers/misc/ocxl/core.c
>>> index b7a09b21ab36..fdfe4e0a34e1 100644
>>> --- a/drivers/misc/ocxl/core.c
>>> +++ b/drivers/misc/ocxl/core.c
>>> @@ -230,8 +230,17 @@ static int configure_afu(struct ocxl_afu *afu,
>>> u8 afu_idx, struct pci_dev *dev)
>>> if (rc)
>>> goto err_free_pasid;
>>>
>>> + if (afu->config.lpc_mem_size || afu-
>>>> config.special_purpose_mem_size) {
>>> + rc = ocxl_link_add_lpc_mem(afu->fn->link,
>>> + afu->config.lpc_mem_size + afu-
>>>> config.special_purpose_mem_size);
>>
>> I don't think we should count the special purpose memory, as it's
>> not
>> meant to be accessed through the GPU mem BAR, but I'll check.
>
> At least for OpenCAPI 3.0, there is no other in-spec way to access the
> memory if it is not mapped by the NPU.


Yes, that's clarified now and we should take the special purpose memory
into account when defining the full range.

Fred


>>
>> What happens when unconfiguring the AFU? We should reduce the range
>> (see
>> also below). Partial reconfig doesn't seem so far off, so we should
>> take
>> it into account.
>>
>
> The mapping is left until the last AFU on the link offlines it's
> memory, at which point we clear the mapping from the NPU.
>
>>
>>> + if (rc)
>>> + goto err_free_mmio;
>>> + }
>>> +
>>> return 0;
>>>
>>> +err_free_mmio:
>>> + unmap_mmio_areas(afu);
>>> err_free_pasid:
>>> reclaim_afu_pasid(afu);
>>> err_free_actag:
>>> diff --git a/drivers/misc/ocxl/link.c b/drivers/misc/ocxl/link.c
>>> index 58d111afd9f6..2874811a4398 100644
>>> --- a/drivers/misc/ocxl/link.c
>>> +++ b/drivers/misc/ocxl/link.c
>>> @@ -84,6 +84,11 @@ struct ocxl_link {
>>> int dev;
>>> atomic_t irq_available;
>>> struct spa *spa;
>>> + struct mutex lpc_mem_lock;
>>> + u64 lpc_mem_sz; /* Total amount of LPC memory presented on the
>>> link */
>>> + u64 lpc_mem;
>>> + int lpc_consumers;
>>> +
>>> void *platform_data;
>>> };
>>> static struct list_head links_list = LIST_HEAD_INIT(links_list);
>>> @@ -396,6 +401,8 @@ static int alloc_link(struct pci_dev *dev, int
>>> PE_mask, struct ocxl_link **out_l
>>> if (rc)
>>> goto err_spa;
>>>
>>> + mutex_init(&link->lpc_mem_lock);
>>> +
>>> /* platform specific hook */
>>> rc = pnv_ocxl_spa_setup(dev, link->spa->spa_mem, PE_mask,
>>> &link->platform_data);
>>> @@ -711,3 +718,57 @@ void ocxl_link_free_irq(void *link_handle, int
>>> hw_irq)
>>> atomic_inc(&link->irq_available);
>>> }
>>> EXPORT_SYMBOL_GPL(ocxl_link_free_irq);
>>> +
>>> +int ocxl_link_add_lpc_mem(void *link_handle, u64 size)
>>> +{
>>> + struct ocxl_link *link = (struct ocxl_link *) link_handle;
>>> +
>>> + u64 orig_size;
>>> + bool good = false;
>>> +
>>> + mutex_lock(&link->lpc_mem_lock);
>>> + orig_size = link->lpc_mem_sz;
>>> + link->lpc_mem_sz += size;
>>
>>
>> We have a choice to make here:
>> 1. either we only support one LPC memory-carrying AFU (and the above
>> is
>> overkill)
>> 2. or we support multiple AFUs with LPC memory (on the same
>> function),
>> but then I think the above is too simple.
>>
>> From the opencapi spec, each AFU can define a chunk of memory with
>> a
>> starting address and a size. There's no rule which says they have to
>> be
>> contiguous. There's no rule which says it must start at 0. So to
>> support
>> multiple AFUs with LPC memory, we should record the current maximum
>> range instead of just the global size. Ultimately, we need to tell
>> the
>> NPU the range of permissible addresses. It starts at 0, so we need
>> to
>> take into account any intial offset and holes.
>>
>> I would go for option 2, to at least be consistent within ocxl and
>> support multiple AFUs. Even though I don't think we'll see FPGA
>> images
>> with multiple AFUs with LPC memory any time soon.
>>
>
> Ill rework this to take an offset & size, the NPU will map from the
> base address up to the largest offset + size provided across all AFUs
> on the link.
>
>>
>>> + good = orig_size < link->lpc_mem_sz;
>>> + mutex_unlock(&link->lpc_mem_lock);
>>> +
>>> + // Check for overflow
>>> + return (good) ? 0 : -EINVAL;
>>> +}
>>> +EXPORT_SYMBOL_GPL(ocxl_link_add_lpc_mem);
>>
>> Do the symbol really need to be exported? IIUC, the next patch
>> defines a
>> higher level ocxl_afu_map_lpc_mem() which is meant to be called by a
>> calling driver.
>>
>
> No, I'll remove it.
>
>>
>>> +
>>> +u64 ocxl_link_lpc_map(void *link_handle, struct pci_dev *pdev)
>>> +{
>>> + struct ocxl_link *link = (struct ocxl_link *) link_handle;
>>> +
>>> + mutex_lock(&link->lpc_mem_lock);
>>> + if (link->lpc_mem) {
>>> + u64 lpc_mem = link->lpc_mem;
>>> +
>>> + link->lpc_consumers++;
>>> + mutex_unlock(&link->lpc_mem_lock);
>>> + return lpc_mem;
>>> + }
>>> +
>>> + link->lpc_mem = pnv_ocxl_platform_lpc_setup(pdev, link-
>>>> lpc_mem_sz);
>>> + if (link->lpc_mem)
>>> + link->lpc_consumers++;
>>> + mutex_unlock(&link->lpc_mem_lock);
>>> +
>>> + return link->lpc_mem;
>>
>> Should be cached in a temp variable, like on the fast path,
>> otherwise
>> it's accessed with no lock.
>
> Good spotting, thanks.
>
>>
>>> +}
>>> +
>>> +void ocxl_link_lpc_release(void *link_handle, struct pci_dev
>>> *pdev)
>>> +{
>>> + struct ocxl_link *link = (struct ocxl_link *) link_handle;
>>> +
>>> + mutex_lock(&link->lpc_mem_lock);
>>> + link->lpc_consumers--;
>>> + if (link->lpc_consumers == 0) {
>>> + pnv_ocxl_platform_lpc_release(pdev);
>>> + link->lpc_mem = 0;
>>> + }
>>> +
>>> + mutex_unlock(&link->lpc_mem_lock);
>>> +}
>>> diff --git a/drivers/misc/ocxl/ocxl_internal.h
>>> b/drivers/misc/ocxl/ocxl_internal.h
>>> index 97415afd79f3..db2647a90fc8 100644
>>> --- a/drivers/misc/ocxl/ocxl_internal.h
>>> +++ b/drivers/misc/ocxl/ocxl_internal.h
>>> @@ -141,4 +141,46 @@ int ocxl_irq_offset_to_id(struct ocxl_context
>>> *ctx, u64 offset);
>>> u64 ocxl_irq_id_to_offset(struct ocxl_context *ctx, int irq_id);
>>> void ocxl_afu_irq_free_all(struct ocxl_context *ctx);
>>>
>>> +/**
>>> + * Increment the amount of memory required by an OpenCAPI link
>>> + *
>>> + * link_handle: The OpenCAPI link handle
>>> + * size: The amount of memory to increment by
>>> + *
>>> + * Return 0 on success, negative on overflow
>>> + */
>>> +extern int ocxl_link_add_lpc_mem(void *link_handle, u64 size);
>>
>> We've removed all the 'extern' in a previous patch.
>
> Thanks, I spotted this too (after I posted it).
>
>>> +
>>> +/**
>>> + * Get the amount of memory required by an OpenCAPI link
>>> + *
>>> + * link_handle: The OpenCAPI link handle
>>> + *
>>> + * Return the amount of memory required by the link, this value is
>>> undefined if
>>> + * ocxl_link_add_lpc_mem failed.
>>> + */
>>> +extern u64 ocxl_link_get_lpc_mem_sz(void *link_handle);
>>
>> I don't see that one defined anywhere.
>>
>
> Whoops, I'll remove it.
>
>> Fred
>>
>>
>>> +
>>> +/**
>>> + * Map the LPC memory for an OpenCAPI device
>>> + *
>>> + * Since LPC memory belongs to a link, the whole LPC memory
>>> available
>>> + * on the link bust be mapped in order to make it accessible to a
>>> device.
>>> + *
>>> + * @link_handle: The OpenCAPI link handle
>>> + * @pdev: A device that is on the link
>>> + */
>>> +u64 ocxl_link_lpc_map(void *link_handle, struct pci_dev *pdev);
>>> +
>>> +/**
>>> + * Release the LPC memory device for an OpenCAPI device
>>> + *
>>> + * Releases LPC memory on an OpenCAPI link for a device. If this
>>> is the
>>> + * last device on the link to release the memory, unmap it from
>>> the link.
>>> + *
>>> + * @link_handle: The OpenCAPI link handle
>>> + * @pdev: A device that is on the link
>>> + */
>>> +void ocxl_link_lpc_release(void *link_handle, struct pci_dev
>>> *pdev);
>>> +
>>> #endif /* _OCXL_INTERNAL_H_ */
>>>

\
 
 \ /
  Last update: 2019-09-19 10:42    [W:0.051 / U:2.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site