Messages in this thread | | | Date | Tue, 17 Sep 2019 18:37:28 +0100 | From | Russell King - ARM Linux admin <> | Subject | Re: [PATCH] ARM: dts: imx6dl: SolidRun: add phy node with 100Mb/s max-speed |
| |
On Tue, Sep 17, 2019 at 07:26:58PM +0200, Andrew Lunn wrote: > > diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c > > index b3893347804d..85cf4a4a5e81 100644 > > --- a/drivers/net/phy/at803x.c > > +++ b/drivers/net/phy/at803x.c > > Hi Russell > > This won't work. In the kernel logs, you see > > kernel: Generic PHY 2188000.ethernet-1:00: attached PHY driver [Generic PHY] > > The generic PHY driver is being used, not the at803x driver.
Well, the _correct_ driver needs to be used for the PHY specific features to be properly controlled. Using the generic driver in this situation will not be guaranteed to work.
-- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up
| |