Messages in this thread | | | Subject | Re: [PATCH v4 1/2] dt-bindings: backlight: lm3630a: add enable_gpios | From | Dan Murphy <> | Date | Fri, 13 Sep 2019 09:06:51 -0500 |
| |
Andreas
On 9/12/19 4:32 PM, Andreas Kemnade wrote: > add enable-gpios to describe HWEN pin > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> > Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
> --- > changes in v2: added example > changes in v3: added Acked-by > changes in v4: moved enable-gpios to the right position > in the example > .../bindings/leds/backlight/lm3630a-backlight.yaml | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml > index dc129d9a329e..c8470628fe02 100644 > --- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml > +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml > @@ -29,6 +29,10 @@ properties: > '#size-cells': > const: 0 > > + enable-gpios: > + description: GPIO to use to enable/disable the backlight (HWEN pin). > + maxItems: 1 > + > required: > - compatible > - reg > @@ -96,6 +100,7 @@ examples: > led-controller@38 { > compatible = "ti,lm3630a"; > reg = <0x38>; > + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; > > #address-cells = <1>; > #size-cells = <0>;
| |