lkml.org 
[lkml]   [2019]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC,v2 2/6] i2c: add I2C Address Translator (ATR) support

> Here i2c-0 is the "local" bus, i2c-4 and i2c-5 are the remote busses on
> ports 0 and 1. As you can see the eeproms are accessed using a name like
> "4-0050", meaning physical slave address 0x50 on bus 4. No alias is needed.
>
> Should you want to know the alias, perhaps for debugging (it's the
> address you'll see on your logic analyzer), they are shown in the kernel
> log.

And to add to that: The aliases on i2c-0 will be marked busy and show up
as used if you run i2cdetect. So, you'd need a force-flag if you'd want
to access them from userspace.

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-09-10 19:17    [W:0.044 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site