lkml.org 
[lkml]   [2019]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 6/6] arm64: dts: khadas-vim3: add commented support for PCIe
From
Date
On 10/09/2019 11:12, Marc Zyngier wrote:
> On Mon, 09 Sep 2019 18:50:42 +0100,
> Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> Hi Marc,
>>
>> Le 09/09/2019 à 18:37, Marc Zyngier a écrit :
>>> On Sun, 08 Sep 2019 14:42:58 +0100,
>>> Neil Armstrong <narmstrong@baylibre.com> wrote:
>>>>
>>>> The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
>>>> lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
>>>> an USB3.0 Type A connector and a M.2 Key M slot.
>>>> The PHY driving these differential lines is shared between
>>>> the USB3.0 controller and the PCIe Controller, thus only
>>>> a single controller can use it.
>>>>
>>>> The needed DT configuration when the MCU is configured to mux
>>>> the PCIe/USB3.0 differential lines to the M.2 Key M slot is
>>>> added commented and may uncommented to disable USB3.0 from the
>>>> USB Complex and enable the PCIe controller.
>>>>
>>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>>>> ---
>>>> .../amlogic/meson-g12b-a311d-khadas-vim3.dts | 22 +++++++++++++++++++
>>>> .../amlogic/meson-g12b-s922x-khadas-vim3.dts | 22 +++++++++++++++++++
>>>> .../boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 ++++
>>>> .../dts/amlogic/meson-sm1-khadas-vim3l.dts | 22 +++++++++++++++++++
>>>> 4 files changed, 70 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
>>>> index 3a6a1e0c1e32..0577b1435cbb 100644
>>>> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
>>>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
>>>> @@ -14,3 +14,25 @@
>>>> / {
>>>> compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b";
>>>> };
>>>> +
>>>> +/*
>>>> + * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
>>>> + * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
>>>> + * an USB3.0 Type A connector and a M.2 Key M slot.
>>>> + * The PHY driving these differential lines is shared between
>>>> + * the USB3.0 controller and the PCIe Controller, thus only
>>>> + * a single controller can use it.
>>>> + * If the MCU is configured to mux the PCIe/USB3.0 differential lines
>>>> + * to the M.2 Key M slot, uncomment the following block to disable
>>>> + * USB3.0 from the USB Complex and enable the PCIe controller.
>>>> + */
>>>> +/*
>>>> +&pcie {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&usb {
>>>> + phys = <&usb2_phy0>, <&usb2_phy1>;
>>>> + phy-names = "usb2-phy0", "usb2-phy1";
>>>> +};
>>>> + */
>>>
>>> Although you can't do much more than this here, I'd expect firmware on
>>> the machine to provide the DT that matches its configuration. Is it
>>> the way it actually works? Or is the user actually expected to edit
>>> this file?
>>
>> It's the plan when initial VIM3 support will be merged in u-boot mainline,
>> and the MCU driver will be added aswell :
>> https://patchwork.ozlabs.org/cover/1156618/
>> A custom board support altering the DT will be added when this patchset
>> is merged upstream.
>>
>> But since these are separate projects, leaving this as commented is ugly,
>> but necessary.
>
> I agree with the unfortunate necessity. However, could you please have
> a comment here, indicating that the user isn't expected to change this
> on their own, but instead rely on the firmware/bootloader to do it
> accordingly?

Yes, sure.

Neil

>
> Thanks,
>
> M.
>

\
 
 \ /
  Last update: 2019-09-10 11:15    [W:0.056 / U:1.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site